INTRODUCTION
6/13
Manual No. O-QB_80-En-1A-00
This manual should be read thoroughly and under-
stood completely prior to operating or servicing your
rigid dump truck. Failure to do so could result in
personal injury and/or damage to the machine.
This manual should be considered a permanent part
of your rigid dump truck and should be kept stored in
the cab of the rigid dump truck at all times.
Measurements in this manual are given in both metric
and imperial units. Use only correct replacement parts
and fasteners. Be sure to use the correct metric or
imperial tools as required when replacement of a part
or fastener is necessary.
Right-hand and left-hand sides are determined by
facing in the direction of forward travel.
Product identification numbers should be recorded in
the applicable locations in the rigid dump truck
Machine Numbers section of the manual. Accurately
record all the numbers to ensure traceability in case
identification is required. These recorded numbers are
required when ordering replacement parts. A second
copy of the identification numbers should be retained
in a secure place off the rigid dump truck.
program for customers who operate and maintain their
equipment as described in this manual. The warranty
is explained on the warranty certificate which you
should have received from your dealer.
This warranty provides you with the assurance that
Hitachi will back its products when defects occur with-
in the warranty period. In some circumstances, Hitachi
also provides field
improvements, often without
charge to the customer, even if the product is out of
warranty.
NOTE: Should the equipment be misused, abused
or modified to change its performance beyond the
original factory specifications, the warranty will
become void and field improvements will be de-
nied.
Setting fuel delivery above specifications or otherwise
overpowering machines will result in such action.
When