1. Precaution
A: SUPPLEMENTAL RESTRAINT
SYSTEM “AIRBAG”
Airbag system wiring harness is routed on and
along body panels.
CAUTION:
I All Airbag system wiring harness and con-
nectors are colored yellow. Do not use electri-
cal test equipment on these circuits.
I Be careful not to damage Airbag system wir-
ing harness when repairing the body panel.
2
5-1 [S1A0]
SPECIFICATIONS AND SERVICE DATA
1. Precaution
2. Body Datum Points
Various master repair locations are established as datum points used during body repairs. In addition, guide
holes, locators and indents are provided to facilitate panel replacement and achieve alignment accuracy.
NOTE:
Left and right datum points are all symmetrical to each other.
A: ROOM SECTION
B5M0847A
(13) Front fender attaching hole at
front pillar center portion M6
(14) Front fender attaching hole at
front pillar lower portion M6
(19) Retainer attaching hole at side
rail outer 3.2 mm (0.126 in) dia.
(20) Center pillar outer hole 14 mm
(0.55 in) dia.
(21) Front seat belt adjust plate
attaching hole M10
(22) Side sill outer hole 20 mm (0.79
in) dia.
(23) Rear quarter outer door switch
attaching hole 20 mm (0.79 in)
dia.
(64) Center pillar (LWR) gauge hole
13 mm (0.51 in) dia.
(81) Rear shelf (UPR) center hole 8
mm (0.31 in) dia.
(82) Rear side bulk head (UPR)
gauge hole 7 mm (0.28 in) dia.
(85) Rear quarter outer gauge hole
20 mm (0.79 in) dia.
(87) Six light upper retainer attaching
hole 6.2 mm (0.244 in) dia.
(88) Retainer attaching square hole
at side rail outer 8 × 8 mm (0.31
× 0.31 in)
(89) Retainer attaching square hole
at rear quarter outer 8 × 8 mm
(0.31 × 0.31 in)
(92) Rear shelf (UPR) hole 6 mm
(0.24 in) dia.
3
[S2A0] 5-1
SPECIFICATIONS AND SERVICE DATA
2. Body Datum Points
B: REAR SECTION
B5M0848A
(38) Front panel instrument panel
attaching hole 18 × 36 mm (0.71
× 1.42 in) dia. oblong hole
(46) Rear shock absorber attaching
hole 13 mm (0.51 in) dia.
(83) Rear skirt outer gauge hole 20
mm (0.79 in) dia.
(84) Rear extension attaching hole
6.2 mm (0.244 in) dia.
(86) Skirt rear i