Service Repair Manual
328D LCR Excavator
Model: 328D LCR EXCAVATOR GTN
Configuration: 328D LCR Excavator GTN00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
328D Excavator Machine Systems
Media Number -KENR6014-04
Publication Date -01/02/2017
Date Updated -17/02/2017
Final Drive - Disassemble - Type-One
SMCS - 4050-015
S/N - GTN1-187
S/N - MKR1-197
Transmission Repair Stand
Retaining Ring Pliers
Adjustable Screw Assembly
328D LCR Excavator GTN00001-UP (MACHINE) POWERED BY C7 Engine(SEBP...
Slide Hammer Puller Gp
A. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the thoroughly
clean the exterior of the component. This will prevent dirt from entering the internal
Note: Some of the images that are in this procedure do not show the sprocket assembly that
is attached to the final drive housing. If necessary, the weights that are given include the
weight of the sprocket assembly.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
2. Fasten the final drive to Tooling (A) , as shown. The weight of the final drive assembly is
approximately 312 kg (68