Service Repair Manual
962H Wheel Loader
Product: WHEEL LOADER
Model: 962H WHEEL LOADER N4A
Configuration: 962H Wheel Loader N4A00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train
Media Number -RENR8867-05
Publication Date -01/06/2014
Date Updated -27/06/2014
Torque Converter from Transmission, Output Transfer
Gears - Separate
SMCS - 3003-076
Tool Part Number Part Description Qty
Lever Puller Hoist
A. Remove the torque converter, the transmission, and the output transfer gears. Refer to
Disassembly and Assembly, "Torque Converter, Transmission and Output Transfer Gears -
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
962H Wheel Loader N4A00001-UP (MACHINE) POWERED BY C7 Engine(SEBP3...
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Disconnect harness assemblies (2) and (5) .
2. Remove tube assembly (4) .
3. Remove bolts (3) and transmission oil pump (1) .
4. Remove tube assembly (6) .
962H Wheel Loader N4