From Send2Press® Newswire — Print Friendly Version
ASAME Technology Offers Online Demos for Strain and
Geometry Measurements Made with Digital Camera-Based
Mon, 28 Sep 2009, 07:59:54 EDT
CEDAR PARK, Texas, Sept. 28 (SEND2PRESS NEWSWIRE) -- ASAME Technology LLC
today announces the addition of online demonstrations for its digital camera-based strain
measurement systems - ASAME (Automated Strain Analysis and Measurement
Environment) Target Model; and GPA (Grid Pattern Analyzer) 100 Model.
The demonstrations provide step-by-step overviews of how the software and hardware
work together to obtain strain data over areas of deformed sheet metal or plastic parts
where a pattern of known-size squares or circles has been applied to the part surface prior
The ASAME Target Model demonstration instructs on how the digital photography
equipment is set up for image calibration and capture; how images are transferred and processed using the ASAME software;
and how strain and geometry data are calculated and displayed for an area of squares or circles on the part surface.
The GPA-100 Model demonstration instructs on how the GPA camera unit is assembled, calibrated, and positioned on the part
surface for image capture. It also reveals how images are processed with the software to obtain the major and minor strain for
a single circle or square on the part surface.
In addition to the ASAME and GPA system demos, a demonstration of the extensive display and analysis features for each
model is also available.
The ASAME Display Software demonstration illustrates features only available for the ASAME display software versus the
GPA display software. These include 3-D strain contours, strain directions, point cloud displays and other options requiring the
availability of 3-D data with correspondence to the strain data.
For the GPA Display Software demonstration, the following features, also available in the ASAME Display Software