PRODUCTION MARQUEE SERIES PRODUCT FEATURES ETHERNET PRODUCT SPECIFICATIONS PM-0213-T PM-0220-T PM-0113-T PM-0420-T • NO SOFTWARE REQUIRED! Embedded web server • Integrated production monitoring system • Selection menu of 30+ data source input variables • Monitor production data through web browser • Collect real time data over ethernet • Store production data to 3rd party spreadsheets • Selectable downtime reason codes • Programmable break and downtime schedules • Variable event driven color changes • Machine state text and override messages • Upgradable firmware (update to new features) • Backup and restore application/program • 1, 2, and 4 line alphanumeric display • 13 and 20 character width; tricolor LED • 6 programmable inputs (24 VDC PNP) • Dual mode data display (2 and 4 line models) • Quad mode data display (1 line model) • 10/100 ethernet communication port • 100,000 hour rated LED life • Operating temperature 0-55 C • Metal housing; NEMA 1 • Hand held IR programmer • 120 VAC power; 24 VDC (1 line model) • Sensor power supply (24 VDC @ 1 amp) D A T A V I S O R through PLANT NETWORK WEIGHT DIMENSIONS (W x H x D) PART NUMBER MODEL PM-0113-T (1 line, 13 characters, tricolor) 26.0” x 4.5” x 1.75” 2.8 LBS. PM-0213-T (2 line, 13 characters, tricolor) 25.5” x 6.25” x 3.75” 10.8 LBS. PM-0220-T (2 line, 20 characters, tricolor) 39.75” x 6.25” x 3.75” 17.9 LBS. PM-0420-T (4 line, 20 characters, tricolor) 39.75” x 11.0” x 3.75” 26.2 LBS. View Production Data Anywhere in the World SOFTWARE EMBEDDED WEB SERVER Toll Free Phone: 877-378-0240 Toll Free Fax: 877-378-0249 sales@servo2go.com www.servo2go.com Sold & Serviced By: EXOR 10150 International Blvd. Cincinnati, Ohio 45246 Tel. (513) 874-0900 www.exor-rd.com OEE (Overall Equipment Eectiveness): This setup of the marquee uses several of the data sources to congure this calculation. Using Machine Availability (runtime/total time), Machine Performance (average cycle time/expected cycle time), and Quality (good parts/total parts) calculates the OEE of your process. KPI’s (Key Performance Indicators): This setup of the marquee displays production data and process information. Total Count, Bad Count, Rate, Cycle Time, and Downtime are several of the selectable KPI’s to display on the marquee. KPI’s help address your production problems immediately saving setup time, reducing downtime, and producing a higher quality part. Machine operators and plant management can view, monitor, and collect real time KPI’s that inform and motivate from the marquee. Real Time KPI’s with Message Call Inputs: In addition to displaying KPI’s, this setup of the marquee utilizes inputs to broadcast an “override” message on a selected line of the marquee. Downtime, maintenance, and setup messages can be displayed on the marquee when the corresponding input becomes active. An elapsed timer is also displayed to show how long the manufacturing process has been in this condition. Event Driven Color Changes: This setup of the marquee allows the data source to control color change within the marquee based on percentages of that selected data source. All 30+ production data sources inputs have this capability. Displayed data sources can be shown in green when on pace, yellow when falling behind, or blinking red when below the required target. Takt Time (Target Counter) Pace Tool: This setup of the marquee is used to help machine operators understand the environment of their manufacturing process. The target counter, an actual count, a remaining or elapsed takt timer, percent of target counter, and the daily goal are all calculated to display the real time process data for both the operator and production supervisor to view on the plant oor. APPLICATION EXAMPLES Production Marquee Series Set Up and Functionality WEB BROWSER SCREEN CAPTURES Toll Free Phone: 877-378-0240 Toll Free Fax: 877-378-0249 sales@servo2go.com www.servo2go.com Sold & Serviced By: