Service Repair Manual
140M Series 3 Motor Grader
Product: MOTOR GRADER
Model: 140M 3 MOTOR GRADER N9D
Configuration: 140M Series 3 Motor Grader N9D00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Machine Systems
Media Number -UENR3488-02
Publication Date -01/09/2018
Date Updated -24/09/2018
Articulation Cylinder - Remove and Install - Left Side
SMCS - 5265-010
Tool Part Number
Double Acting Cylinder
Pin Puller Sleeve As
Electric Hydraulic Pump Gp (115V)
Electric Hydraulic Pump Gp (230V)
a. Release the system pressure.
When you are using hydraulic cylinders and puller studs, always ensure
that the rated capacity of the puller stud meets or exceeds the rated
capacity of the hydraulic cylinder. If the puller stud does not meet or
140M Series 3 Motor Grader N9D00001-UP (MACHINE) POWERED BY C9.3 Engi...
exceed the rated capacity of the hydraulic cylinder, a sudden failure of
the puller stud could occur. The sudden failure of the puller stud could
result in personal injury or death.
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
Refer to Special Publication, PERJ1017, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local regulations and mandates.
1. Install Tooling (A) onto the hydraulic tank. Atta