Service Repair Manual
950L Wheel Loader
Product: WHEEL LOADER
Model: 950L WHEEL LOADER LXX
Configuration: 950L Wheel Loader LXX00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
Media Number -UENR0633-19
Publication Date -01/07/2015
Date Updated -29/10/2018
Fuel Injection Pump - Install
SMCS - 1251-012
Tool Part Number
Crankshaft Turning Tool
Engine Turning Tool
Timing Pin (Crankshaft)
(1) The Crankshaft Turning Tool is used on the front pulley.
(2) This Tooling is used in the aperture for the electric starting motor.
Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
Ensure that all adjustments and repairs that are carried out to the fuel
system are performed by authorized personnel that have the correct
Before beginning ANY work on the fuel system, refer to Operation and
Maintenance Manual, "General Hazard Information and High-
Pressure Fuel Lines" for safety information.
950L Wheel Loader LXX00001-UP (MACHINE) POWERED BY C7.1 Engine(M006...
Refer to System Operation, Testing and Adjusting, "Cleanliness of
Fuel System Components" for detailed information on the standards of
cleanliness that must be observed during ALL work on the fuel system.
Ensure that wiring harness are correctly routed and the cable straps
are not over tightened. Over tightening of the cable straps will damage
the wiring harness convoluting.
1. If necessary, follow Step 1.a through Step 1.d to install bracket (31) to fuel injection pump
a. Position fuel injection pump (19) in a suitable stand.
b. Position bracket (31) onto fuel injection pump (19). Ensure that the bracket is