ARCHITECTS' AND ENGINEERS'
The Twisted Pair Video Receiver(s) shall be Alpha
Communications®/Golmar EL562, or approved
equal. EL562 shall be mounted inside the appropri-
ate video-intercom station.
Unit(s) shall be used to convert the digital video
signal being sent to a conventional twisted pair video
The EL562 module(s) shall have positive screw
terminal connectors and shall also be provided with
a jumper for video termination as required for each
Contractor shall observe all local and national elec-
trical and building codes.
Copyright© 2010, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: firstname.lastname@example.org
The Alpha Communications®/Golmar EL562
Twisted Pair Video Receiver is a compact,
assembly that mounts into a variety of video
-intercom stations, in order to convert the
digital video signal being sent to a conven-
tional twisted pair video signal.
Typically, the EL562 mounts behind the video-
intercom monitor, by plugging into a small
opening in the back of the monitor. A provided
jumper on the EL562 allows for video termi-
nation at the end of a riser/line, as required.
Compact design mounts behind video-intercom station
Positive screw terminals connectors
• Comes with a jumper for video termination as required
• Works with a variety of video-intercom stations
Rev. 1 - 05/10
Due to continuous product improvement, all colors, sizes, materi-
als, finishes and specifications are subject to change without notice.