Service Repair Manual
Models
323D L Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323D L EXCAVATOR NDE
Configuration: 323D L Excavator NDE00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09
Publication Date -01/10/2017
Date Updated -18/10/2017
i02746816
Rocker Shaft - Assemble
SMCS - 1102-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
1P-1859
Retaining Ring Pliers
1
B
1P-0510
Driver Gp
1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning
fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be
deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or
damaged, use new parts for replacement. Dirt and other contaminants can damage the precision
component. Perform assembly procedures on a clean work surface. Keep components covered and
protected at all times.
1/3
323D L Excavator NDE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEBP5...
2020/8/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g01375874
1. If necessary, Use Tooling (B) in order to install bushing (10) into arm assemblies (4) and
(3).
Illustration 2
g01375734
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
2. Install spring (9) onto shaft assembly (5).
3. Install arm assembly (4) onto shaft assembly (5).
4. Install bracket (8) onto shaft assembly (5).
5. Install arm assembly (3) onto shaft assembly (5).
6. Install washer (7) onto shaft assembly (5).
2/3
323D L Excavator NDE00001-UP (MACHINE) POWERED BY C6.4 Engine(SEBP5...
2020/8/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_prin