Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
80265 FIBERGLASS PATCH KIT PART 1
2. COMPOSITION/INFORMATION ON INGREDIENTS
BASED EPOXY RESIN
3. HAZARDS IDENTIFICATION
May cause eye, skin and respiratory irritation. May cause skin sensitization.
Primary Routes of Entry:
Eye and skin contact, ingestion, inhalation
Signs and Symptoms of Exposure: May cause pain, redness or swelling of the eyes and excessive blinking and tear production. Repeated
skin contact may cause allergic skin reactions. Excessive accidental exposure may cause headache,
dizziness, nausea and mild respiratory irritation. Ingestion may cause nausea and vomiting.
Medical Conditions Recognized as
Being Aggravated by Exposure:
Preexisting eye, skin and respiratory disorders may be aggravated by overexposure to this product.
4. FIRST AID MEASURES
If swallowed, DO NOT induce vomiting. Keep individual calm. Obtain medical attention.
Move to fresh air in case of accidental inhalation of vapours. Oxygen or artificial respiration if needed.
Obtain medical attention.
Wash off with soap and water. If skin irritation persists, call a physician.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical
attention if irritation persists.
5. FIRE FIGHTING MEASURES
Flash Point °F(C°):
Recommended Extinguishing Media:
Carbon Dioxide, Dry Chemicals, Foam.
Special Fire-Fighting Procedures:
Material will not burn unless preheated. Firefighters should wear self-
contained breathing apparatus. Use water spray to cool exposed
Hazardous Products of Combustion:
Oxides of carbon, Aldehydes, Acid vapors
Unusual Fire/Explosion Hazards:
May decompose above 300 degrees F.; may polymerize above 500
degrees F. in which case closed containers may rup