Service Repair Manual
Models
C18 Industrial Engine
Shutdown SIS
Previous Screen
Product: INDUSTRIAL ENGINE
Model: C18 INDUSTRIAL ENGINE N8F
Configuration: C18 Industrial Engine N8F00001-UP
Disassembly and Assembly
CX38–P892 Petroleum Transmission
Media Number -M0086381-00
Publication Date -01/10/2018
Date Updated -23/10/2018
i07566677
Pump Drive - Disassemble - Integral
SMCS - 3108-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
421-5662
Eyebolt Lifting Assembly
4
B
1P-2420
Transmission Repair Stand
1
C
1U-9895
Cross Block
1
123-4370
Puller Stud (M20 x 2.5)
1
FT-1408
Spacer
2
6V-7742
Nut
1
D
439-3939
Link Bracket Assembly
1
E
154-6181
Forcing Bolt
2
F
8B-7551
Bearing Puller Gp
1
Start By:
a. Remove the pump drive. Refer to Disassembly and Assembly, "Pump Drive - Remove".
1/10(W)
w
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Illustration 1
g06243397
1. With torque converter housing (3) placed on suitable cribbing, attach Tooling (A) to torque converter
housing (3). The weight of torque converter housing (3) is approximately 104 kg (230 lb).
2. Support bearing cage assembly (2) with suitable cribbing, allowing access to bolts (1). Remove bolts
(1). Use a suitable lifting device to remove torque converter housing (3) and place on Tooling (B).
Illustration 2
g06243494
3. Remove retaining ring (4). Remove gear assembly (5).
2/10(W)
w
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Illustration 3
g06244466
4. Remove bearing cone (6) and bearing cup (7). Repeat this step for the opposite side.
Illustration 4
g06244467
5. Remove retaining rings (8).
3/10(W)
w
2020/6/14
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Illustration 5
g06243500
6. Remove bolt (9).
Illustration 6
g06243774
7. Attach Tooling (C) to idler shaft (10). Remove idler shaft (10).
4/10(W)
w
2020/6/14
https://127.0.0