© 2007- 2008 Test Killer, LTD All Rights Reserved
BCM50 Rls. 2.0 And BCM200/400 Rls. 4.0
Configuration And Maintenance
A customer added new floor space to the warehouse, and had some electricians run cable to the
new area. When a T7316 set is connected, the line indicators flash continually. The set is about
1950 feet (600 meters) from the BCM. Which step can be taken to correct the problem?
A. Use a SAPS with the T7316E.
B. Replace the phone with a T7100.
C. Turn the loop length option in Element Manager to "long".
D. Advise the customer that the maximum distance is 1500 feet.
A customer is installing a GASM8 in a BCM400 in the North American region. They want to
set the module to enhanced mode. How must the Mode/Country DIP switches on the right side,
at the rear of the module, be set?
A. Set all DIP switches to On.
B. Set all DIP switches to Off.
C. Set the first DIP switch to On and the rest (2-8) to Off.
D. Set the first DIP switch to Off and the rest (2-8) to On.
A technician is supporting BCM50 Rls. 2.0 and BCM Rls. 4.0. Business Element Manager has
just been installed from the BCM50 Rls. 2.0 Administrator Applications download web page.
Which steps are needed to connect to both systems?
A. Both versions of BCM Element Manager must be installed.
B. Add New Network Element, connect to the BCM50, and accept cartridge download.
C. Go to the BCM50 Administrator Applications download web page and select the BCM50
D. Go to Nortel's Customer Support/Software Downloads web page and select the Element
Manager software update.
On a company's default system, six buses of DS30 channel blocks are assigned to Media Bay
Modules (MBMs) (2/6 channel split). The DS30 allocation needs to be cha