Service Repair Manual
Models
318B L, 318B N and 318B LN
Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 318B N EXCAVATOR 7KZ
Configuration: 318B L & 318B LN Excavators 7KZ00001-UP (MACHINE) POWERED BY 3046 Engine
Disassembly and Assembly
3046 Engine For Caterpillar Built Machines
Media Number -SENR6458-05
Publication Date -01/04/2004
Date Updated -22/04/2004
i01646268
Flywheel - Remove
SMCS - 1156-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
138-7575
Link Bracket
1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2
318B L & 318B LN Excavators 7KZ00001-UP (MACHINE) POWERED BY 3046 En...
2020/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g00527024
1. Install Tool (A), a strap, and a suitable lifting device onto flywheel (2) .
2. Remove six bolts (1) that secure flywheel (2) from the crankshaft.
3. Remove flywheel (2). The weight of the flywheel is 50 kg (110 lb).
Note: Dowel pin hole (3) is slightly offset in order to ensure correct installation.
4. Check the condition of the dowels (not shown). If the dowels are damaged, use new parts
for replacement.
Illustration 2
g00527069
5. Check the condition of the ring gear (4). Replace the ring gear with a new part if the gear is
worn or damaged.
6. Place flywheel (2) and ring gear (4) on a suitable support.
Note: Identify the orientation of the ring gear on the flywheel for the correct positioning
when the new ring gear is installed.
7. Use a hammer and a punch in order to remove ring gear (4) from the flywheel.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Dec 1 10:38:04 UTC+0800 2020
2/2
318B L & 318B LN Excavators 7KZ00001-UP (MACHINE) POWERED BY 3046 En...
2020/12/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model