Copyright© 1998-2005, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: firstname.lastname@example.org
Rev. 2 - 10/05
Gate Pedestal Units
The Alpha Communications® gate pedestals are
used with a variety of intercom, video-intercom,
telephone and access control equipment to allow the
equipment to be mounted at a gated residence.
Can be used with a variety of Intercom, Video-intercom,
Telephone and Access Control equipment
• Heavy Duty Welded Steel Construction
• Heavy Duty Painted Grey or Black Finish
• Hollow Construction Allows for easy wire installation
From the finished ground level to the center of the extended
gooseneck is 43.75" (1111mm). From the centerline of the main
pedestal mounting shaft to the edge of the equipment mounting
plate on the extended gooseneck is 12.50" (318mm).
Free-Standing Gate Pedestal - Grey finish
(requires model HO-PEDPLT mounting
plate when used with Horizon master)
(requires model IN-PEDPLT mounting
plate when used with Infinity master)
Free-Standing Gate Pedestal - Black finish
(requires model VI-PEDPLT mounting
plate when used with Vista master)
NOTES: Contractor must use 1/2" x 6" or 7/16" x 6"
anchor bolts to mount the pedestal to the concrete ground
base. The mounting bolts should be less than 1.125"
(28mm) above the mounting surface, or the cover will not
cover the mounting surface properly.
Due to continuous product improvement, all colors, sizes, materi-
als, finishes and specifications are subject to change without notice.
ARCHITECTS' AND ENGINEERS'
The free standing gate pedestal(s) shall be Alpha
Communications®/Sentex (MODEL NO. HERE) or
approved equal. The pedestal(s) shall be made of
heavy duty welded steel in a heavy duty painted (Grey
or Black) finish. Pedestal(s) shall be