Service Repair Manual
Models
930H Wheel Loader
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 930H WHEEL LOADER DHC
Configuration: 928HZ 930H Wheel Loader DHC00001-04199 (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
924H, 924HZ, 928HZ and 930H Wheel Loaders Machine Systems
Media Number -KENR9440-02
Publication Date -01/08/2012
Date Updated -01/08/2012
i07528732
Loader Frame and Rear Frame - Connect
SMCS - 7051-077; 7054-077
S/N - DHC1-UP
S/N - HXC1-UP
Connection Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
1P-1863
Retaining Ring Pliers
1
B
284-5122
Stand
1
8S-7611
Tube
1
8S-7615
Pin
1
C
8T-5255
Hydraulic Jack
1
D
417-1324
Repair Stand Set
2
H
189-0412
Shackle
2
J
5P-0960
Grease Cartridge
1
K
1P-0510
Driver Gp
1
L
-
Loctite C5A Copper Anti-Seize
-
M
1P-0481
Drive Plate
2
N
1P-0495
Drive Plate
2
P
1B-2716
Bolt
1
6V-8185
Nut
1
1/19
928HZ 930H Wheel Loader DHC00001-04199 (MACHINE) POWERED BY C6.6 En...
2020/4/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, PERJ1017, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat® products.
Dispose of all fluids according to local regulations and mandates.
Note: Apply Tooling (J) to all seals before installation. Lubricate all pin bores and all pins with Tooling
(L) before installation of the pins.
Illustration 1
g01118635
Note: Reference Illustration 4 for seal orientation.
1. Use Tooling (K) to install lip seal (39) into upper cap (35).
Illustration 2
g01118634
Note: Reference Illustration 4 for seal orientation.
2. Use Tooling (K) to install lip seal (3