ESM-II 12 thru 25
Truck Models Covered by This Manual
This manual consists of a “base” module that pertains to
ESM-II models and other modules that pertain only to
specific models. Manuals shipped with the truck contain
the base module and the module specific to the purchased
You may, however, purchase specific modules and expand
your manual to fully cover multiple models. To do so, order
the desired modules as you would any other Clark part.
and Use of This Manual
Clark arranges parts and service procedures by standard-
You can quickly locate a specific point in the manual by
ized Groups. In this manual, Croups are similar to “chap-
using the headers and footers that appear on every Section
ters.” Croups are listed in the indexes on the next page.
page. The following illustration points out these areas.
Each Croup begins with a table of contents that shows the
Sections contained within the Croup. Lengthy Sections
also begin with a table of contents.
Each Croup and Section has an identifying name and num-
ber, or “ID.”
Each page also has a unique ID. The page ID consists of
three numbers separated by hyphens. The three numbers
represent the Croup number, the Section number, and the
page number. For Example, “00-1-2” on the lower corner
of the page indicates Croup 00, Section 1, Page 2.
The Croup number sometimes has a letter or letters added
to it in parentheses if one or more variations of the Croup
exist. For example, if the truck has a standard transaxle,
Croup 06 is expressed as “06(S);” if the truck has a hydro-
static transmission, Croup 06 is expressed as “06(H).”
This manual is intended for the use of trained service
personnel. Please read Croup SA, “Safe Maintenance” and
the Operator’s Manual before working on or operating the
Copyright Clark Material Handling 1995
SM 596, Aug ‘95
This service p