Epson WF 3820 Setup
Epson WF 3820 is the most affordable printer apt for your busy home office. The Epson
Wf 3820 setup printer comes with an automatic document feeder (ADF) for sending
multipage documents to the scanner. In this case, the ADF holds 35 pages. The
compact printer enables AirPrint, Epson iPrint, and Epson Remote print. These features
ease your daily printing job.
Unpack the printer and place it on a flat surface.
Remove all the protective tapes from the printer. Lift the scanner, remove the
protective sheet, and close down the scanner lid.
Ensure to place the printer near the router to reduce any interference.
Check and unpack the following materials inside the package:
Connect the power cord to the printer's power jack and the other end to the
Raise the control panel of the printer and turn on the product.
Set your preferred language, country, date, and time on the printer's control
To install the ink cartridges on Epson Wf 3820 setup printer, lift the scanner unit
until it locks into place.
Shake the ink cartridges, unpack the ink cartridges and remove the protective
tape from the cartridges.
Insert the cartridges into their slots. Firmly press the cartridges down until they sit
in their place.
Close the scanner unit and begin ink charging by following the instructions
prompted on the printer's control panel.
Complete the ink charging and lower the control panel.
Now, lift the output tray and pull out the paper cassette of the printer.
Slide-out the edges to their maximum, load a stack of paper, and slide-in the
Insert the paper cassette, lower the output tray, and pull-out the output extension.
Follow the on-screen instructions and complete the paper setup for your Epson
WF 3820 printer.
Connect the phone cord to the printer's LINE port on the printer and another end
to the telephone jack.
Tap Proceed o