Service Repair Manual
318F L Excavator
Model: 318F L EXCAVATOR FFT
Configuration: 318F L Excavator FFT00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
316F, 318F Excavator Machine Systems
Media Number -UENR5585-06
Publication Date -01/08/2015
Date Updated -12/09/2018
Final Drive - Disassemble
SMCS - 4050-015
Tool Part Number
M14x2x18 mm Lifting Eye Assembly
Transmission Repair Stand
Bearing Puller Assembly
M16x2x24mm Lifting Eye Assembly
a. Remove the final drive and the travel motor assembly.
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
318F L Excavator FFT00001-UP (MACHINE) POWERED BY C4.4 Engine(M00660...
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with yo