Material Safety Data Sheet
1. PRODUCT IDENTIFICATION
116DA SILICONE SPRAY LUBRICANT 10.25OZ AE
2. COMPOSITION/INFORMATION ON INGREDIENTS
800 ppm; 1900 mg/m3
1000 ppm; 1800 mg/m3
3. HAZARDS IDENTIFICATION
May cause eye, skin and respiratory irritation. Excessive inhalation causes headache, dizziness, nausea,
and incoordination. Aspiration hazard if swallowed.
Primary Routes of Entry:
Eye and skin contact, ingestion, inhalation
Signs and Symptoms of Exposure:
Excessive overexposure may cause giddiness, dizziness, headache, nausea and in extreme cases,
unconsciousness and respiratory depression. Overexposure may cause eye and skin redness.
Medical Conditions Recognized as
Being Aggravated by Exposure:
4. FIRST AID MEASURES
If swallowed, DO NOT induce vomiting. Keep individual calm. Obtain medical attention.
Move to fresh air in case of accidental inhalation of vapours. Oxygen or artificial respiration if needed.
Obtain medical attention.
Wash off with soap and water. If skin irritation persists, call a physician.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical
attention if irritation persists.
5. FIRE FIGHTING MEASURES
Flash Point °F(C°):
Flammable - Based on flame projection test
Recommended Extinguishing Media:
Carbon Dioxide, Dry Chemicals, Foam.
Special Fire-Fighting Procedures:
Firefighters should wear self-contained breathing apparatus. Keep
containers cool. Use equipment or shielding required to protect against
bursting or venting of containers. Water spray may be ineffective on flames
but should be used to keep fire-