TM608819 - 6100D, 6110D, 6115D, 6125D and 6130D(Tier 0 —Tier 3/Stage IIIA)
Tractors Repair Technical Manual(60000—), 11/2014—
Remove and Install Final Drive Assembly
Remove and Install Final Drive Assembly
1.
NOTE:
It is not necessary to remove fuel tank, but doing so may ease removal and installation of left-hand final drive.
(See Remove and Install Fuel Tank in Section 30, Group 05.)
PUC2088-UN: Final Drive Drain
LEGEND:
A - Drain Plug
Remove final drive drain plug (A) to drain oil into suitable container.
2.
Install drain plug (A).
3.
PUC2208-UN: .
LEGEND:
A - Cap Screw (4 used)
Loosen the cab mounting cap screws. Remove cap screw (A) while removing final drive housing.
1/9
2020/7/11
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM608819_09001faa829...
4.
PUC3808-UN: Right-Hand Side Half Axle
LEGEND:
B - Screw (2 used)
C - SCV Mounting Braket
Loosen SCV mounting bracket (C) by removing cap screws (B) while removing final drive housing.
5.
PY20649-UN: Left Hand Side Half Axle
LEGEND:
D - Cap Screws
E - Transmission Harness
F - Bracket
Loosen transmission harness bracket (F) by removing cap screws (D) while removing the final drive housing.
6.
CAUTION:
Prevent bodily injury caused by accidental dropping of tractor when removing wheel. Use jack and floor
stands with a minimum capacity of 4540 kg (10,000 lb.).
2/9
2020/7/11
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM608819_09001faa829...
PUC2089-UN: Jacking of Tractor
Jack tractor from under drawbar support and set jack stands under front of drawbar.
7.
CAUTION:
The approximate weight of the wheel and tire assembly is 260 kg (573.20 lb.).
Remove left-hand wheel assembly. (See Remove and Install Front and Rear Wheels in Section 80, Group 15.)
8.
PY20651-UN: .
Item
Measurement
Specification
Wheel and Tire
Weight
260 kg
(573.20 lb.)
3/9
2020/7/11
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM608819_09001faa829...
PY20650-UN: .
LEGEND:
A - Cotter Pin
B - Pin
C - Bracket, Link Arm
D - Cap Screw (3 used)
Remove cotter pin (A) and pin (B)