7318404enUS (02-19) (A)
Printed in Belgium
©2019 Bobcat Company. All rights reserved.
(TL43.80) S/N B4BT11001 & Above
(TL43.80X) S/N B4BU11001 & Above
Never service the Bobcat telescopic
handler without instructions.
Have good ventilation when
welding or grinding painted
Wear dust mask when grinding
painted parts. Toxic dust and gas
can be produced.
Avoid exhaust fume leaks which
can kill without warning. Exhaust
system must be tightly sealed.
Cleaning and maintenance are
flammable and explosive gases.
Keep arcs, sparks, flames and
Batteries contain acid which
burns eyes or skin on contact.
Wear protective clothing. If acid
contacts body, flush well with
water. For eye contact flush well
Safety Alert Symbol: This symbol with a warning statement,
means: “Warning, be alert! Your safety
message that follows.
Disconnecting or loosening any
hydraulic tubeline, hose, fitting,
component or a part failure can
cause boom to drop. Do not go
under boom when raised unless
supported by an approved boom
stop. Replace if damaged.
Keep body, jewelry and clothing
electrical contact, hot parts and
Wear eye protection to guard
from battery acid, compressed
springs, fluids under pressure
and flying debris when engines
are running or tools are used.
Use eye protection approved for
type of welding.
handler with boom up unless
boom is held by an approved
boom stop. Replace if damaged.
Never modify equipment or add
attachments not approved by
Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/operator
without any specific technical training. M