Material Safety Data Sheet
Telephone #(s): Safety Information: (800) 828-6571
Fuji Xerox Co., Ltd.
Health Emergency: (585) 422-2177
1600, Takematsu, Minamishigara-Shi Rochester, NY
Transportation Emergency(Chemtrec):(800) 424 - 9300
Kanagawa-Ken, 250-01 Japan
Section I - Product Identification
DocuColor 4 Yellow Developer
Part No. 600K73590
This is not a WHMIS controlled product.
Ingredients (% by wt.)
Cu-Zn ferrite powder (>90%)1
Yellow pigment (0.2 - 0.4%)
Section II - Emergency and First Aid
Primary Route of Entry:
Symptoms of Overexposure:
Minimal respiratory tract irritation may occur as with
exposure to large amounts of any non-toxic dust.
Flush with water.
Medical Conditions Generally Aggravated by Exposure:
Wash with soap and water.
None when used as described by product literature.
Remove from exposure.
Dilute stomach contents with several glasses of water.
Section III - Toxicology and Health Information
This material has been evaluated by Xerox Corporation. The toxicity data presented below is for toner only and based on test results
for similar xerographic materials.
>5 g/kg (rats) practically non-toxic.
10 mg/m3 (total dust)
>5 g/kg (rabbits) practically non-toxic.
15 mg/m3 (total dust)
>5 mg/l (rats, 4 hr exposure) practically non-toxic.
5 mg/m3 (respirable dust)
>20 mg/l (rats, calculated 1 hr exposure) non-poisonous, DOT.
Not an irritant.