Service Repair Manual
Models
385C L MH EXCAVATOR
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 385C L MH EXCAVATOR WAW
Configuration: 385C Material Handler WAW00001-UP (MACHINE) POWERED BY C-18 Engine
Disassembly and Assembly
C15 and C18 Engines for Caterpillar Built Machines
Media Number -RENR8261-28
Publication Date -01/08/2015
Date Updated -28/08/2018
i02536739
Fuel Priming Pump - Remove and Install
SMCS - 1258-010
Removal Procedure
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Turn the fuel supply to the “OFF” position.
1/3
385C Material Handler WAW00001-UP (MACHINE) POWERED BY C-18 Engine(S...
2020/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g01049296
2. Remove bolts (2). Remove fuel priming pump assembly (1) from fuel filter base (4).
3. Remove gasket (3) from the fuel priming pump assembly and the fuel filter base.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3
385C Material Handler WAW00001-UP (MACHINE) POWERED BY C-18 Engine(S...
2020/10/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 2
g01049296
1. Position gasket (3) on fuel filter base (4).
2. Position fuel priming pump assembly (1) on the fuel filter base and install bolts (2).
3. Turn the fuel supply to the “ON” position.
4. Remove the air from the system