INTRODUCTION
IN-02
SAFETY ALERT SYMBOL AND HEADLINE
NOTATIONS
In this manual, the following safety alert symbol and
signal words are used to alert the reader to the
potential for personal injury of machine damage.
This is the safety alert symbol. When you see this
symbol, be alert to the potential for personal injury.
Never fail to follow the safety instructions prescribed
along with the safety alert symbol.
The safety alert symbol is also used to draw attention
to component/part weights.
To avoid injury and damage, be sure to use appropri-
ate lifting techniques and equipment when lifting heavy
parts.
CAUTION:
Indicated potentially hazardous situation which
could, if not avoided, result in personal injury or
death.
IMPORTANT:
Indicates a situation which, if not conformed to the
instructions, could result in damage to the machine.
NOTE:
Indicates supplementary technical information or
know-how.
UNITS USED
SI Units (International System of Units) are used in
this manual.
MKS system units and English units are also
indicated in parenthheses just behind SI units.
Example : 24.5 MPa (250 kgf/cm2, 3560 psi)
A table for conversion from SI units to other system
units is shown below for reference purposees.
Quantity
To Convert
From
Into
Multiply By
Pressure
MPa
kgf/cm2
10.197
MPa
psi
145.0
Power
kW
PS
1.360
kW
HP
1.341
Temperature
C
F
C 1.8+32
Velocity
km/h
mph
0.6214
min-1
rpm
1.0
Flow rate
L/min
US gpm
0.2642
mL/rev
cc/rev
1.0
Quantity
To Convert
From
Into
Multiply By
Length
mm
in
0.03937
mm
ft
0.003281
Volume
L
US gal
0.2642
L
US qt
1.057
m3
yd3
1.308
Weight
kg
lb
2.205
Force
N
kgf
0.10197
N
lbf
0.2248
Torque
N m
kgf m
1.0197
N m
lbf ft
0.7375