Epson WF 4740 Setup
Epson WF 4740 is an All-in-One printer that lets you perform the print, scan, fax, and
copy operations over a wireless, wired, or USB cable network. Features offered by this
printer are: High-Quality prints. Read below to know first-time Epson WF-4740 setup.
Dual, Front-loading paper tray
Automatic 2-sided printing
Inside this product box, you can find the following components: Epson
WorkForce Pro WF-4740 all-in-one printer, instructions booklet, CD-ROM
with drivers, power cord, and 4 DURABrite Ultra Ink cartridges.
You can set up this printer manually by following the simple, quick steps given
Open the Epson printer box.
Take the printer and other components out of the box.
Remove all the packing materials from your Epson printer.
Connect your Epson printer into an electrical outlet.
Raise the control panel.
Press the Power button on the printer’s control panel.
Set the basic printer preferences as per your desire.
Shake the ink cartridges and take them out of their package.
Now, raise the scanner unit.
Insert each ink cartridges one-by-one into their slots.
After inserting all the cartridges, lower the scanner unit.
Now, take the paper tray completely out of the printer.
Slide the side edges of the tray.
Load a stack of plain paper in the tray.
Adjust the paper edges properly.
Place the paper tray back into the printer.
Pull out the output tray of your Epson WF-4740 setup.
If you wish to use the printer for the fax operation, then connect a phone cord into
the printer now.
The Epson WF 4740 printer’s hardware setup process is now complete.
To perform the printer-related operation from your computer, you need to install
the Epson WF 4740 printer driver software on it.
You can use either the software CD or the downloaded driver file to perform the
For the USB or Wired connection: Make sure to connect a USB cable o