Service Repair Manual
Model
228 SKID STEER LOADER
Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 228 SKID STEER LOADER 6BZ
Configuration: 228 Skid Steer Loader 6BZ00700-UP (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
228 Skid Steer Loader Machine Systems
Media Number -RENR2887-01
Publication Date -01/11/2009
Date Updated -04/11/2009
i01710029
Lift Cylinder - Remove
SMCS - 5102-011
Removal Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
1P-1860
Retaining Ring Pliers
1
Start By:
A. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
B. Tilt the cab. Refer to Disassembly and Assembly, "Cab - Tilt".
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the attachments have been lowered, oil is cool before
removing any components or lines. Remove the oil filler cap only when
the engine is stopped, and the filler cap is cool enough to touch with
your bare hand.
1/4
228 Skid Steer Loader 6BZ00700-UP (MACHINE) POWERED BY 3034 Engine(SEB...
2019/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines and on all cylinders for inst