MATERIAL SAFETY DATA SHEET
PRODUCT AND COMPANY IDENTIFICATION
Coating Gelcoat Series 949x
Polyester coating formulated to be used in composites and fiber
Progress Plastiques Cie
(819) 477-4516 or 1-800-363-2000
2400, rue Canadien, Drummondville,
Québec, Canada J2C 7W3
24 hours Emergency :
Canutec : 613-996-6666
This Material Safety Data Sheet has been prepared by department of health and security of :
Progress Plastiques Cie 2400, Canadien Drummondville Qc J2C 7W3 Tel (819) 477-4516
In date of :
March , 2th, 2005
March , 2th, 2008
INFORMATION ON INGREDIENTS
CAS# : 000100-42-5
Weight (% w/w) :
Fumed Silica (amorphous) CAS# : 112926-00-8
Weight (% w/w) :
1- 5 %
Hazards coming from the presence of styrene in gelcoat.
Lowest flashpoint in closed container : 32°C (Pensky-Marten (styrene))
This is a flammable product and fire hazard is possible when certain conditions are present.
Containers used for handling and stocking this material are dangerous because vapours are heavier
than air and may be at the bottom.
ATTENTION :Risk of explosion in presence of sparks and opened flame.
Unusual fire and explosion hazard : Keep containers tightly closed and isolated from heat, electrical
equipment, sparks and flames. Never use welding or cutting torches on or near drum (even empty)
because product (even just residue) can ignite explosively.
If polymerisation takes place in a container, there is possibility of violent rupture of the container.
Vapours are uninhibited and may form polymers in vents or flame arrestors of storage tanks
resulting in stoppage of vents. This product is an irritant and is slightly absorbed by skin. Burn
hazard if in contac