Copyright© 2003-2010, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: firstname.lastname@example.org
*Please add the following suffix to the model#
shown above. Add 'A' for use with HT3009 and/or
HT2009 (2-wire systems). Add 'B' for use with
HT3011 and/or HT2011 (2-wire loop systems) or for
use with HT3033 (and QwikBUS™ systems).
Rev. 4 - 03/10
RTM Series Push Buttons for
Modular Series Door Stations
The RTM push button modules are designed to be
used with the Alpha Communications®/S.T.R.™
modular series door entry stations. There are four
(4) configurations available from one (1) to four (4)
push buttons per module.
All RTM push buttons feature LED illumination and
plug-in connector for easy wiring and maintenance.
All RTM push button modules are 3.94"w x 3.94"h
(100mm x 100mm), and are made to snap into the
MT series modular panel trim frame(s).
To service the RTM series modules, once installed,
use the model 13510 key / tool unit.
Due to continuous product improvement, all colors, sizes, materials,
finishes and specifications are subject to change without notice.
ARCHITECTS' AND ENGINEERS'
Push button module(s) shall be Alpha Com-
munications®/S.T.R.™ RTM series or ap-
proved equal. Push button(s) shall be modu-
lar type and shall be used in conjunction with
the proper MT series modular panel frame(s).
Contractor shall provide the proper number
of 1,2,3 or 4 button modules as needed.
All RTM button modules shall feature LED
illumination and plug-in connector for easy
wiring and system maintenance.
Contractor shall observe all local and na-
tional electrical and building codes.