PRODUCT NAME:
WOLMANAC® CONCENTRATE 50%
WOLMANAC® CONCENTRATE 60%
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Revision Date: 05/31/2006
Manufacturer: Arch Wood Protection, Inc., 1955 Lake Park Drive, Smyrna, GA 30080
General Use: Restricted-use pesticide for wood preservation
EPA Reg # 62190-2, 62190-14, PCP Reg # 21226
2. COMPOSITION / INFORMATION ON INGREDIENTS
EXPOSURE LIMITS (mg/m3)
HAZARDOUS
INGREDIENTS
PERCENT
CAS #
OSHA-PEL
ACGIH-TLV
ACGIH-STEL
Chromic Acid
23.75 - 28.5 7738-94-5
(as Cr) 0.1 (Ceiling)
0.05
None
Arsenic Acid
56.00 - 60.0 7778-39-4
(as As)0.01
0.01
None
Copper Oxide
9.00 - 11.1 1317-38-0
(as Cu) 1.0 (dusts/mists)
1.0 (dusts/mists) None
3. HAZARDS IDENTIFICATION
Inhalation: Corrosive to the upper airways when inhaled in concentrations exceeding recommended
exposure limits. Short-term overexposure may cause muscle spasms, dizziness and collapse. Prolonged
overexposure may cause perforation of nasal septum, hoarseness of the voice, liver injury and red patches
on the skin. Chronic arsenic exposure may cause nervous system damage.
Eye Contact: Corrosive to the eyes.
Skin Contact: Severe irritation to the skin.
Ingestion: Corrosive. Can cause internal hemorrhage and death if consumed as a liquid.
Toxic by ingestion; Moderately toxic by dermal contact.
4. FIRST AID MEASURES
Inhalation: Remove from exposure. If severe breathing difficulty should arise immediately seek medical
aid. If breathing has stopped, administer artificial respiration or oxygen.
Eye Contact: Exposed eyes should be flushed with large amounts of saline or water for at least 15 minutes,
(greater than 1 liter per eye, minimum) using low pressure, taking care that the eyes remain open during this
entire procedure. If wearing contact lenses, immediately flush eyes with water for a short period prior to
removing contacts, then resume flushing procedures as described above. Immediately seek medical ai