Service Repair Manual
325C FM EXCAVATOR
Model: 325C FM EXCAVATOR G1L
Configuration: 325C FOREST SWING MACHINES G1L00001-UP (MACHINE) POWERED BY 3126B Engine
Disassembly and Assembly
325C Forest Machines Machine Systems
Media Number -RENR5477-00
Publication Date -01/06/2004
Date Updated -11/06/2004
Final Drive - Disassemble
SMCS - 4050-015
S/N - G1L1-UP
Tool Part Number
Transmission Repair Stand
Retaining Ring Pliers
Adjustable Screw Assembly
Slide Hammer Puller Gp
325C FOREST SWING MACHINES G1L00001-UP (MACHINE) POWERED BY 31...
a. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of
the component should be thoroughly cleaned. This will prevent dirt from entering the
Note: Some of the images that are in this procedure do not show the sprocket assembly that
is attached to the final drive housing. If necessary, the weights that are given include the
weight of the sprocket assembly.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
2. Fasten the final drive to Tooling (A), as shown. The weight of the final drive assembly is
approximately 312 kg (688 lb).
3. Remove bolts (1) and the washers that hold the cover in position.
325C FOREST SWING MACHINES