Rev. 1 - 05/09
SF380A Single Bed
Visual Only Patient Station
The Alpha Communications® SF380A visual only patient
station uses micro-controller technology. The SF380A is
used primarily with the NC300/NC300II series nurse-call
systems and it controls two (2) dome indicators (Red and
White), senses button presses and switch closures, and pro-
vides ROUTINE, BATH EMERGENCY and CODE CALLS.
The SF380A provides ROUTINE call input via a jack for the
insertion of a model SF301/8 (single), SF302 (double) (or
equivalent), and can signal a medium priority CORD OUT
call. When used with an Emergency Station, the SF380A
provides a medium priority BATH EMERGENCY call.
When used with an Code Station, the SF380A provides a high
priority CODE call. The station addressing is accomplished
using a seven (7)-position dip switch. Six (6) switches set the
station address and the seventh switch determines whether
lamps are supervised. The station includes a lighted 'CALL-
PLACED' indicator when a call is placed and a 'CANCEL'
button, mounted on a rugged ABS white plastic faceplate.
The SF380A is a drop-in replacement for the SF380C, with
dipswitch-selectable lamp supervision.
Lighted CALL-PLACED Indicator
• Call-reset CANCEL Push-button
Signaling for ROUTINE, BATH EMERGENCY, CODE
CALL and FIRE with smoke detectors
Low power requirements
• Addressable - requires no 'IR' series station
Station-bus connector pin-compatible with existing NC300
'IR' series stations
Flame Retardant type White Plastic Faceplate
Projects: 0.44" (11mm) from mounting
Steel City #52171 box with Steel City
#52C14 plaster ring, or Alpha Communi-
cations® Model #IH358 box with IH357
ring, or EXACT EQUAL. Vertical mount.
Attractive, flame retardant type plastic face-
plate. All electronic components are circuit
Plug-in connectors for all wiring.