®
MATERIAL SAFETY DATA SHEET
ParexLahabra, Incorporated
ParexLahabra, Incorporated
P.O. Box 189
11290 S. Vallejo Court
1870 Stone Mountain-Lithonia Road
French Camp, California 95231
Redan, Georgia 30074
(770) 482-7872
(209) 983-8002
Effective Date: September 12, 2005
Product(s): ENROCK FR-100 ADMIXTURE
Hazardous Ingredients/ Identity Information
Hazardous
Components
CAS #
OSHA PEL
Mg/m3
ACGIH TLV
Mg/m3
% by Weight
Styrene-butadiene
9003-55-8
NE
NE
32-37%
Water
7732-18-5
NE
NE
61-65%
NE- NON ESTABLISHED
NA- NOT APPLICABLE
May be used to comply with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200.
Standard must be consulted for specific requirements.
ENROCK FR-100
Physical/ Chemical Characteristics
Appearance and
Odor:
White liquid, slight sweet/ammonia odor
Boiling Point:
100 deg.C
Solubility in Water:
Dilutable
Specific Gravity
(Water = 1):
1.03
Vapor Density
(Air = 1):
Greater than 1
Vapor Pressure
(mm Hg):
Less than 1
Melting Point:
NA
Fire and Explosion Hazard Data
Extinguishing Media:
Use that which is appropriate for surrounding fire
Flammable Limits:
Non-Flammable
Flash Point (Method Used):
Non-Combustible
Special Fire Fighting
Procedures:
None
Unusual Fire and Explosion
Hazards:
Material may spatter above 100 C / 212 F
Reactivity Data
Hazardous Decomposition
or Byproducts:
Monomer vapors can be evolved when materials is heated above
177C/350F
Hazardous Polymerization:
Will not occur
Incompatibility
(Materials to avoid):
NA
Stability:
Conditions to Avoid:
Stable
Temperatures above 177 C / 350 F
ENROCK FR-100
Health Hazard Data
Route of Entry: Inhalation:
Skin:
Eyes:
Vapor or mist can irritate nose, throat, and lungs and cause headache, nausea, drowsiness, slurred
speech, dizziness and unconsciousness in areas of insufficient ventilation.
Irritating to skin upon repeated or prol