iConverter® 1-Module Power Chassis
1-Module Power Chassis with an external AC adapter
Houses all models of hot-swappable iConverter media
converter and switch modules
NEBS Level 3 Certification
Optional wide temperature range of -40 to +60º C
Management is available with the installation of an
iConverter NID plug-in module with integrated
SNMP management via NetOutlook™ provides real-time
port and module information, remote parameter
configuration and trap notification
Models 8241-1 and 8241-2 support Dying Gasp (Power
Loss Trap) through a management module
Wall-mount or table-top options
Lifetime Warranty and free 24/7 Technical Support
The 1 inch high 1-Module iConverter Power Chassis supports
a single iConverter module and is powered by an external AC
power adapter. The 1-Module Power Chassis is designed for
network edge or Customer Premises deployments where
compact size, low cost and flexible upgrades are important.
Any iConverter module can be installed in the 1-Module Power
Chassis. The chassis supports managed edge demarcation
applications when an iConverter Network Interface Device (NID)
plug-in module with integrated management (such as a the
GX/TM shown in the photo at left) is installed in the chassis.
All iConverter modules are hot-swappable and support a variety
of mounting options. They can also be mounted in a 19-Module
(2U high) or 5-Module (1U high) space-saving rack-mountable
chassis (19-inch or 23-inch) with any combination of redundant
AC and 48VDC power supplies. They can also be mounted in a
2-Module AC or 48VDC power chassis.
The iConverter family of managed fiber access media converters
are used in Service Provider access networks and Enterprise
LANs. iConverter media converters provide fiber connectivity with
copper to fiber, multimode fiber to single-mode fiber, or dual fiber
to single-fiber conversions.
*Module not included.
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • email@example.com • 140 Technology Dr.