Service Manual
99759-55110
Chassis, Mast & Options
FB10KRT
EFB10-00011-up
FB12KRT
EFB10-20001-up
FB15KRT
EFB10-50001-up
FOREWORD
This service manual is a guide to servicing of Mitsubishi forklift trucks of 1.0 ton, 1.25
ton and 1.5 ton models. The instructions are grouped by systems to serve the
convenience of your ready reference.
Long productive life of your forklift trucks depends to a great extent on correct servicing
— the servicing consistent with what you will learn from this service manual. We hope
you read the respective sections of this manual carefully and know all the components
you will work on before attempting to start a test, repair or rebuild job.
The descriptions, illustrations and specifications contained in this manual were of the
trucks of serial numbers in effect at the time it was approved for printing. Mitsubishi
reserves the right to change specifications or design without notice and without incurring
obligation.
Pub. No. 99759-55110
Safety Related Signs
The following safety related signs are used in this service
manual to emphasize important and critical instructions:
Indicates a specific potential hazard
resulting in serious bodily injury or
death.
Indicates a specific potential hazard
resulting in bodily injury, or damage
to, or destruction of, the machine.
Indicates a condition that can cause
damage to, or shorten service life of,
the machine.
NOTE
WARNING
!
CAUTION
!
HOW TO READ THIS MANUAL
Disassembly diagram (example)
Each disassembly diagram is followed by
Disassembly sequence and Suggestion for
disassembly.
1 Cover, Bolt, Washer (part name)
2 Output shaft (part name)
Suggestion for disassembly
(1) Output shaft removal
Disassembly sequence
Clearance
between
cylinder and
piston
A
B
0.020 to 0.105
0.15
Unit: mm
A: Standard value
B: Repair or service limit
4. Lower the forks or other implements to the ground
before performing any work on the truck. If this
cannot be done, make sure the forks or other
implements are blocked correctly to prevent them
from dropping unexpectedly.
5. Use