AXION 870-810
CMATIC
Repair manual
Original repair manual
1/1
Couverture RHB AXION 870-810 CMATIC (A41)
2020/3/27
http://localhost:8081/webtic/app/Module/1095/3/en/0/164645/002/EN/Target0
Crankshaft bearing seals
Technical specifications
Number
Value
Note – Description
1
—
Crankshaft front bearing seal
2
—
Crankshaft rear bearing seal
For unspecified tightening torques, refer to the section entitled: "Tightening torques".
Environment!
Lubricants and fuel are harmful to the environment.
Pollution
► Collect lubricants and fuel in appropriate containers; store and dispose of them in accordance with the
regulations in force.
Special tool
1/10
Joints de paliers du vilebrequin
2020/3/27
http://localhost:8081/webtic/app/Module/1095/003/en/4.3.5/164659/003/EN/T...
Special tool (I) – Reference no.
Tool for removing the rear bearing seal
N o. 00 1130 887 0
2/10
Joints de paliers du vilebrequin
2020/3/27
http://localhost:8081/webtic/app/Module/1095/003/en/4.3.5/164659/003/EN/T...
Special tool (II) – Reference no.
Tool for fitting the rear bearing seal
N o. 00 1130 889 0
Special tool (III) – Reference no.
Tool for removing the front bearing seal
N o. 00 1130 886 0
3/10
Joints de paliers du vilebrequin
2020/3/27
http://localhost:8081/webtic/app/Module/1095/003/en/4.3.5/164659/003/EN/T...
Special tool (IV) – Reference no.
Tool for fitting the front bearing seal
N o. 00 1130 888 0
Removing the crankshaft rear bearing seal
► Drain the engine oil.
► Uncouple the engine from the transmission.
4/10
Joints de paliers du vilebrequin
2020/3/27
http://localhost:8081/webtic/app/Module/1095/003/en/4.3.5/164659/003/EN/T...
► Remove the transport damper (1).
Transport damper
► Remove the engine flywheel (2).
Flywheel
► Remove the centring pin (1).
► Position the special tool (I) on the seal.
To make it easier to fit the bolts of the special tool, make a hole of 3.5 mm (1) at a depth of 5 mm in
the inner ring of the seal.
5/10
Joints de paliers du vilebrequin
2020/3/27
http://localhost