LINK Ultra Series is a new higher level of UTP products. Ultra Series is intend to horizontal cabling installation of high
speed network and also suitable for high broadband of audio data and video.Ultra Series is design to serve our mission "Link for
the perfect Cabling"
The applications for transmission speed of up to 2.4 Gbps exceed all proposed performance and bandwidth requirements
for Category 6/Class E components and systems. It will support all today application such as Gigabit Ethernet(1000 Base T) and
other LAN protocals, ATM all speed up to 2.4 Gbps, Broadband video (77 chanel at 550 MHz). Intertek Testing Services also
tested the LINK Ultra Category 6 Series for bit error rate to confirmed the products have pass the Giga Bit Non Error Rate.
LINK Ultra Cable is 4-pair UTP cable, that the performanced exceed the Category 6 requirement to TIA/EIA-568-B.2-1
They comply with all of the performance requirements for current and proposed applications such as Gagabit Ethernet
(1000 Base T), 100 BASE-Tx, 10 BASE-T, 622 Mbps ATM, TP-PMD, ISDN, ANALOG (broadband, baseband), DIGITAL VIDEO,
VOICE Over IP and furture Structure Cabling System. Ultra CAT6 Cable have the performance better than CAT5 and CAT5E and
they increased bandwidth and signal-to-noise margin.
: 23 AWG solid bare copper (24 AWG for Patch Cable)
: PE (Polyethylene), 0.99 mm. diameter
: FRPE Isolator Separator
: FRPVC - CMR UL/NEC Rating : US-9116 (Plenum and LSZH - Flame Retardant
& Low Smoke Zero Halogen Polymer Alloy : optional)
: 6.40 mm.
: White (Gray optional)
: 100 ohms ±15% from 1 MHz to 600 MHz
: 536 ns/100 m. max. @ 250 MHz
: 40 ns/100 m. max.
DC Resistance @ 20°C
: 66.58 ohm/Km., max