Simple Guide - Epson Artisan 1430 Setup
To physically organize the Epson artisan 1430 setup printer, these steps will help.
Slowly remove the packaging materials from the inside and outside of the
printer.Connect the power cord of the printer to an electrical outlet and switch on the
To install the ink cartridges:
Lift the printer cover.
You can see the cartridges case at the right end, open the lid.
Remove the yellow tape from the new cartridges.
Next, place the cartridges in the respective color slots and press until they snap
into the right position.
Now, close the cartridges lid and the printer cover.
On the control panel of the Epson artisan 1430 setup printer, press the ink
Wait for some time. Until then, do not perform any operation on the printer.
To load the papers:
You can print on any paper type of any size
Take out the paper support and pull the extension.
Now, draw the output paper tray and its extension out.
Next, adjust the edge guide to the left side.
Place a paper stack in such a way that its shorter edge is inserted first, and the
printable side faces up.
Move the stack to the right edge of the feeder and make sure it stays behind a
Now, adjust the left edge paper guide to fix the paper, but do not fix it so tight that
the article crams.
To install the printer software:
Check if your computer is connected to the printer. If it's connected, then
Insert the installation CD into your computer. If there is no CD drive, download
the Epson artisan 1430 driver software from the Epson website.
When the Autoplay window is shown, run the software, or if the user control
screen is displayed, select continue or yes. If nothing appears, then open the
Follow the instructions on the installer screen.
You have to choose your connection type and Epson artisan 1430 setup
option when prompted.
Epson Artisan 1430 Driver Download
When your computer does not have a CD drive