Service Manual
99759-5B110
Chassis, Mast & Options
FB16NT
EFB11-20011-up
FB18NT
EFB13-20011-up
FB20NT
EFB13-70001-up
MC/FC
For use with FB16NT-FB20NT
Controller Service Manual.
FOREWORD
This service manual is a guide for servicing Mitsubishi forklift trucks. For your convenience
the instructions are grouped by systems as a ready reference.
The long productive life of your forklift trucks depend on regular and proper servicing.
Servicing consistent with what you will learn by reading this service manual. Read the
respective sections of this manual carefully and familiarize yourself with all of the components
before attempting to start a test, repair or rebuild job.
The descriptions, illustrations and specifications contained in this manual are for trucks with
serial numbers in effect at the time of printing. Mitsubishi forklift trucks reserves the right to
change specifications or design without notice and without incurring obligation.
Safety Related Signs
The following safety related signs are used in this service
manual to emphasize important and critical instructions:
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous
situation which, if not avoided, may
result in death or serious injury or
damage to the machine.
Indicates a condition that can cause
damage to, or shorten service life of,
the machine.
NOTE
WARNING
!
CAUTION
!
Pub. No. 99759-5B110
HOW TO READ THIS MANUAL
Disassembly diagram (example)
Sequence
1. Cover, Bolt, Washer (part name)
2. Output shaft (part name)
Suggestion for disassembly
(1) Output shaft removal
Unit: mm (in.)
A
0.020 to 0.105
Clearance between
(0.00079 to 0.00413)
cylinder and piston
0.15
B
(0.0059)
A: Standard value
B: Repair or service limit
Disassembly sequence
Each disassembly diagram is followed
by Disassembly sequence and
Suggestions for disassembly.
4. Lower the forks or other implements to the ground
before performing any work on the truck. If this
cannot be done, make sure the for