Axos 340-310 – 08.2009 – GB
01 02
COMPLETE ASSEMBLY
14
Axos 340-310 – 08.2009 – GB
01 Engine
01 02 Complete assembly
Removing the complete engine
Summary of operations
Important: Carry out this operation on a smooth horizontal and sufficiently firm surface. Use props suited to the
load to block the tractor.
Preliminary operations
– Apply the handbrake.
– Put the gear lever in neutral.
– Remove the removable ballast weights.
– Chock the rear wheels.
– Prevent the front axle from tilting by using chocks.
OPERATION
Designation
1
Remove the engine cover .
2
Drain the engine fluids.
3
Disconnect the battery.
4
Disconnect the cables from the washer pumps.
5
Disconnect the harnesses of the engine, alternator, starter.
6
Remove the battery bay.
7
If option: Remove the frame of the front loader.
8
If option: Disconnect the front lifting lines.
9
If option: Remove the front lift.
10
If option: Disconnect the A/C lines.
11
If option: Remove the hoses of the air/air heat exchanger.
12
Disconnect the fuel supply and return lines.
13
Disconnect the transmission oil cooler lines .
14
Disconnect the LH steering line.
15
Remove the fuel tank.
16
Remove the exhaust extension.
17
Disconnect the hydraulic pump lines.
18
Disconnect the RH steering line.
19
If option: Disconnect the front PTO harness.
20
If option: Disconnect the front PTO shaft.
21
Disconnect the air intake hose.
22
Disconnect the cooling radiator hoses.
23
Remove the transmission shaft.
Remove the casing.
24
Disconnect the accelerator cable .
25
Disconnect the front chassis from the engine.
26
Remove the screws from the clutch casing.
27
Removing the engine.
01 Engine
01 02 Complete assembly
Axos 340-310 – 08.2009 – GB
15
Operation n° 1
– Remove the cover by removing the screws (1).
Operation n° 2
– Drain the coolant.
– Drain the engine oil.
If option:
– Drain the A/C unit.
104bsm20
Fig. 1
Operation n° 3
– Disconnect the battery.
842msm34
Fig. 2
Operation n° 4
– Disconnect the wiper fluid hoses.
– Disconnect the electric connectors of the washer
pumps