Material Safety Data Sheet
Rochester, NY 14644
Telephone #’s Safety Information.: (800) 828-6571
Health Emergency: (716) 422-2177
Transportation Emergency (Chemtrec):(800) 424 - 9300
Section I - Product Identification
DocuPrint P8/Document Work Centre XE60,
XE62, XE80, XE82, XE88, XE90fx
Part No. : 6R916, 13R553, 106R364,
This is not a WHMIS controlled product.
Ingredients (% by wt.)
Styrene acrylate polymer (90-95%)
Carbon Black (1-5%)
Surface treated silica (1%)
Propylene copolymer (1%)
Paraffin Wax (1%)
Section II - Emergency and First Aid
Primary Route of Entry:
Symptoms of Overexposure:
Minimal respiratory tract irritation may occur as with exposure to large
amounts of any non-toxic dust
Flush with water.
Medical Conditions Generally Aggravated by Exposure:
Wash with soap and water.
None when used as described by product literature.
Remove from exposure.
Dilute stomach contents with several glasses of
Section III - Toxicology and Health Information
The toxicology of this toner has been evaluated by Xerox Corporation. Data presented in this section is based on the test results
of this toner or similar reprographic toners.
> 5 g/kg (rats)
10 mg/m3 (total dust )
> 5 g/kg (rabbits)
> 5 mg/l (rats 4 hr exposure)
15 mg/m3 (total dust )
5 mg/m3 (respirable dust )
> 20 mg/l (rats calculated 1 hr exposure)
Non-sensitizing (guinea pigs; human patch)
2.5 mg/m3 (total dust )
Non-irritating (rabbits; human patch)
0.4 mg/m3 (respirable dust)
Non-mutagenicity detected in Ames assay.