Service Repair Manual
Models
328D LCR Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 328D LCR EXCAVATOR RMX
Configuration: 328D LCR Excavator RMX00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
328D Excavator Machine Systems
Media Number -KENR6014-04
Publication Date -01/02/2017
Date Updated -17/02/2017
i06560081
Swing Drive - Disassemble
SMCS - 5459-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
138-7573
Link Bracket
2
B
1U-8221
Nylon Sling
1
C
5P-5197
Pliers
1
Start By:
a. Remove the swing drive. Refer to Disassembly and Assembly, "Swing Drive - Remove"
.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat® products.
Dispose of all fluids according to local regulations and mandates.
1/8
328D LCR Excavator RMX00001-UP (MACHINE) POWERED BY C7 Engine(SEBP...
2020/9/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g00518369
1. Position the swing drive on suitable cribbing, as shown. The weight of the swing drive is
approximately 281 kg (620 lb).
2. Put an alignment mark on the cover and the housing of the swing drive for assembly
purposes.
3. Remove bolts (1) and cover (2).
4. Install Tooling (A) to cover (2).
Illustration 2
g00518372
5. Use a suitable lifting device and Tooling (A) to remove cover (2) from the ring gear of the
swing drive.
2/8
328D LCR Excavator RMX00001-UP (MACHINE) POWERED BY C7 Engine(SEBP...
2020/9/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3
g00518397
6. Use two people to remove carrier assembly (3). T