EPX 16-20s
Part No. 8037870
Book No. SM-715
Jun. 2005
RATED CAPACITY : 1250~2270kg
SERVICE MANUAL
#40-1,Ungnam-Dong,
changwon-city, Kyungnam,
Korea
TMX 12-25
Truck Models Covered by this Manual
This manual consists of “base” module that pertains
to all TMX12-25, ECX16-18 models and other mod-
ules that pertain only to specific models. Manuals
shipped with the truck contain the base module and
the modules specific to the purchased truck.
You may, however, purchase specific modules and
expand your manual to fully cover multiple models.
To do so, order the desired modules as you would
any other Clark part.
Arrangement and Use of this Manual
Clark arranges parts and service procedures by stan-
dardized Groups. In this manual, Groups are similar
to “chapters”. Groups are listed in the indexes on the
next page.
Each Group begins with a table of contents that
shows the Sections contained within the Group.
Lengthy Sections also begin with a table of contents.
Each Group and Section has an identifying name and
number, or “ID”.
Each page also has a unique ID. The page ID con-
sists of three numbers separated by hyphens. The
three numbers represent the Group number, the Sec-
tion number, and the page number. For example,
“00-1-2” on the lower corner of the page indicates
Group 00, Section 1, page 2.
The Group number sometimes has a letter or letters
added to it in parentheses if one or more variations of
the Group exist. For example, if the truck has a stan-
dard transaxle, Group 06 is expressed as “06(S)”; if
the truck has a hydrostatic transmission, Group 06 is
expressed as “06(H)”.
You can quickly locate a specific point in the manual
by using the headers and footers that appear on every
Section page. The following illustration points out
these areas.
This manual is intended for the use of trained service
personnel. Please read Group SA, “Safe Mainte-
nance”, and the Operator’s Manual before working
on or operating the truck.
Group SA, Safe Maintenance
SM 715, Dec ’04
Safety • SA-1-1
Safety Signs and Messages
Safety sign