Anti-corosive Protective Primer
Steel House,WestWharf Road, Karachi-74000, Pakistan. Tel: (92-21) 2856601 Fax: (92-21) 2856598
A general purpose quick drying anti‐corrosive metal primer
based on 100% pure acrylic resins and red oxide pigments.
Suitable for interior or exterior use on steel substrates as primer
in mild to moderately corrosive (industrial and marine)
Solid (Volume%) ACRYOXIDE
57% ± 2%
Red / Brown.
5 litres and 20 litres.
Up to 12 sq. mtr / ltr. Depending on surface profile and
Surface dry in 1 hours, recoatable after 6 hours (in normal
2 Years when stored in dry and cool conditions.
Stir well before use. Apply by brush, roller, air spray or airless
spray for details of spray equipment contact PATSA Technical
Brush and Roller
0 – 5% Thinner # 7
Air spray and Airless Spray
0 – 10%Thinner # 7
Clean all tools and equipment immediately after usewith clean
Do not use when humidity levels may cause surface
condensation (maximum 85%), during rainy conditions or if
temperatures are likely to fall below 5°C during application and
All surfaces should be sound, clean, dry and free from loose
and flaking material, dirt, oil, grease. Best results are achieved
on blast cleaned surface. Prime as soon as possible after
One coat acryoxide metal primer x 50 micorns
Two coats acryshield topcoat x 50 microns each. Or
Two coats patena high gloss x 50 microns each.
SAFETY ‐ FLAMMABLE
Use only well ventilated areas. In case of sufficient ventilation
during application wear suitable respiratory equipment. Do
not breathe vapor / spray.
In case of contact with eyes rinse immediately with plenty
ofsweet water and seek medical advice.
In case of contact with skin, wash immediately with soap and