MATERIAL SAFETY DATA SHEET
4-Minute Epoxy Syringe – Part A
Date of Original Preparation: July 20, 2001 Revision Date: January 7, 2005
Section 1 - Product Information
3700 Atlanta Industrial Parkway NW
Atlanta, GA 30331
For US transportation emergencies call -
For Canadian transportation emergencies
call - Canutec: 613-996-6666
404-696-2730 (USA 8:30am – 4:30pm Eastern
Product Use: Adhesive
Stock Number: 942 Part A
Signs of Overexposure: Irritation, sensitization, dermatitis.
Emergency First Aid: Move to fresh air, remove contaminated clothing, wash effected skin with soap and water, do not
use solvents or thinners; if product gets into eyes, remove contact lenses, flush with water for 15 minutes.
Handling: When handling in enclosed places, wear an organic vapor cartridge respirator (NIOSH / OSHA), solvent
resistant gloves and safety eyewear. Close all containers tightly after use. Do not eat, drink or smoke in work areas.
Clean-up: Eliminate sources of ignition. Remove with rags. Dispose of as hazardous waste.
Other Precautions: Material has an offensive odor. Prolonged exposure may reduce the user’s sensitivity to the odor,
thus reducing the effectiveness of odor as a warning against exposure.
Fire Fighting: Combustible liquid. Use foam, carbon dioxide, dry chemical or water fog or spray.
NFPA Flammability: NA
Bondo Corporation has no oversight with respect to the guidance practices or policies or manufacturing processes of
other companies handling or using this material. The information given in this MSDS is only related to the product as
shipped in its original condition as described in Section 2, “Hazardous Ingredients” and Section 9 “Physical and
Section 2 - Hazardous Ingredients