00060385

Loading ...
Global Do...
News & Politics
<p>MATERIAL SAFETY DATA SHEET
HEXANE
3. HAZARDS IDENTIFICATION
Extremely flammable liquid and vapour. Vapours may cause flash fire or explosion. Harmful if inhaled, 
absorbed through skin, or swallowed. Vapours are mildly irritating to eyes and respiratory tract. High 
vapour concentrations may cause drowsiness. Vapour reduces oxygen available for breathing. See 
"Other Health Effects" Section. Can decompose at high temperatures forming toxic gases. Contents may 
develop pressure on prolonged exposure to heat.
EMERGENCY OVERVIEW:
POTENTIAL HEALTH EFFECTS
EMERGENCY TELEPHONE NUMBERS (FOR EMERGENCIES INVOLVING CHEMICAL SPILLS OR RELEASE)
Toronto, ON  (416) 226-6117                     Montreal, QC (514) 861-1211                     Winnipeg, MB (204) 943-8827
Edmonton, AB (780) 424-1754                  Calgary, AB  (403) 263-8660                       Vancouver, BC (604) 685-5036
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Brenntag Canada Inc.
43 Jutland Rd.
Toronto, ON
M8Z 2G6
(416) 259-8231
Website:  http:\\www.brenntag.ca
WHMIS#:
00060385
Index: 
2009 January 21
PRODUCT IDENTIFICATION
Hexane.
Product Name:  
2009 January 21
Date of Revision:
Effective Date:
GCD0841/09A
n-Hexane.
Chemical Name:
Brake & Parts Cleaner (Hex);  Hexane (Extraction Grade);  Hexane (S);
High Purity Normal Hexane 85 %; Methyl Pentane; Neohexane; Commerical Hexane.
Synonyms:
Hexanes; Aliphatic Hydrocarbon.
Chemical Family:
C6H14; CH3(CH2)4CH3.
Molecular Formula:
Diluent. Industrial solvent, cleaner, degreaser. Chemical intermediate.
Product Use:
WHMIS Classification / Symbol:
READ THE ENTIRE MSDS FOR THE COMPLETE HAZARD EVALUATION OF THIS PRODUCT.
B-2:  Flammable Liquid
D-2B:  Toxic (skin and eye irritant)
Ingredient
CAS#
ACGIH TLV
% Concentration
2. COMPOSITION, INFORMATION ON INGREDIENTS (Not Intended As Specifications)
Solvent Naphtha (Petroleum) Light 
Aliphatic
64742-49-0
 
100
or
 
n-Hexane 
110-54-3
50 ppm (Skin)
55 - 90
Hexane, Isomers, other than n-hexane
Not available.
500 ppm 
10 - 40
Skin Notation:  Contact with skin, eyes and mucous membranes can contribute to the overall exposure and may invalidate the TLV.  Consider
measures to prevent absorption by these routes.
Hexane
Brenntag Canada Inc.
Date of Revision:
2009 January 21
WHMIS Number :
00060385
Page 2 of 8
4. FIRST AID MEASURES
FIRST AID PROCEDURES
Move victim to fresh air.  Give artificial respiration ONLY if breathing has stopped.  Give cardiopulmonary 
resuscitation (CPR) if there is no breathing AND no pulse.  Obtain medical attention IMMEDIATELY.
Inhalation:
Start flushing while removing contaminated clothing. Wash affected areas thoroughly with soap and 
water. If irritation, redness, or a burning sensation develops and persists, obtain medical advice.
Skin Contact:
Immediately flush eyes with running water for a minimum of 20 minutes.  Hold eyelids open during 
flushing.  If irritation persists, repeat flushing.  Obtain medical attention IMMEDIATELY.
Eye Contact:
Do not attempt to give anything by mouth to an unconscious person. If victim is alert and not convulsing, 
rinse mouth out and give 1/2 to 1 glass of water to dilute material.  IMMEDIATELY contact local Poison 
Control Centre.  Vomiting should only be induced under the direction of a physician or a poison control 
centre.  If spontaneous vomiting occurs, have victim lean forward with head down to avoid breathing in of 
vomitus, rinse mouth and administer more water.  IMMEDIATELY transport victim to an emergency 
facility.
Ingestion:
This product contains materials that may cause severe pneumonitis if aspirated.  If ingestion has 
occurred less than 2 hours earlier, carry out careful gastric lavage; use endotracheal cuff if available, to 
prevent aspiration.  Observe patient for respiratory difficulty from aspiration pneumonitis.  Give artificial 
resuscitation and appropriate chemotherapy if respiration is depressed.
Exposure to high concentrations of this material (e.g., in enclosed spaces or with deliberate abuse) may 
be associated with cardiac arrhythmias.  Epinephrine and other sympathomimetic drugs may initiate 
cardiac arrhythmias in persons exposed to this material.  Other drugs with less arrythmogenic potential 
should be considered.  If sympathomimetic drugs are administered, observe for the development of 
cardiac arrythmias. (3)
Medical conditions that may be aggravated by exposure to this product include neurological, 
cardiovascular disorders, diseases of the skin, eyes or respiratory tract.
Note to Physicians:
Contact with mist or spray may cause irritation of mucous membranes, coughing and difficulty in 
breathing. Prolonged exposure over a period of weeks or months to levels well above the TLV may 
cause neurotoxic disease, with symptoms including weakness and lack of sensation in hands and feet. 
See "Other Health Effects" Section.
Inhalation:
Prolonged, confined (especially under the finger nails, under rings or watch bands) or repeated exposure 
may cause skin irritation. May cause defatting, drying and cracking of the skin. Prolonged and repeated 
contact may lead to dermatitis.
Skin Contact:
May be absorbed through intact skin.
Skin Absorption:
Splashes to the eye may cause irritation, redness and pain. Vapours from this product are irritating to the 
eyes.
Eye Contact:
This product causes irritation, a burning sensation of the mouth and throat and abdominal pain.
Ingestion:
Effects (irritancy) on the skin and eyes may be delayed.  Strict adherence to first aid measures following 
any exposure is essential.
Hexane may cause central nervous system (CNS) depression, peripheral nervous system (PNS) effects, 
incoordination, blurred vision, chemical pneumonitis, cardiac arrhythmia and asphyxiation. CNS 
depression is characterized by headache, dizziness, drowsiness, nausea, vomiting and incoordination.  
Severe overexposures may lead to coma and possible death due to respiratory failure. Brief (10 minute) 
inhalation exposure at 1,500 ppm can cause irritation of the respiratory tract, nausea and headache.  At 
5,000 ppm, dizziness and drowsiness can occur.  (3)
n-Hexane causes polyneuropathy or peripheral neuropathy.  The initial symptoms are symmetrical 
sensory numbness of distal portions of the extremities.  Motor weakness is typically observed in muscles 
of the toes and fingers but may also involve muscles of the arms, thighs, and forearms.  The onset of 
these symptoms may be delayed for several months after the beginning of exposure.  The syndrome is 
characterized by axonal swelling on the proximal side of the node of Ranvier, demyelination, and nerve 
fiber degeneration resembling a dying back neuropathy.  (Casarett and Doull's Toxicology, 1991, 
Pergamon Press)
Hexane may sensitize heart muscle causing cardiac arrhythmia, in rare cases. Asphyxia is characterized 
by increased breathing volume, accelerated pulse rate, muscular incoordination, faulty judgement, 
emotional instability, fatigue, nausea, vomiting, bewilderment, gasping respiration and unconsciousness.
Other Health Effects:
5. FIRE-FIGHTING MEASURES
Hexane
Brenntag Canada Inc.
Date of Revision:
2009 January 21
WHMIS Number :
00060385
Page 3 of 8
Flashpoint (°C)
AutoIgnition 
Temperature (°C)
LEL
UEL
Flammability Limits in Air (%):  
-27.  (3)
375.  (3)
1.1.  (3)
7.7.  (3)
B-2:  Flammable Liquid
Flammability Class (WHMIS):
Thermal decomposition products are toxic and may include oxides of carbon and irritating gases.
Hazardous Combustion 
Products:
Vapours from this product are heavier than air, and may "travel" to a source of ignition (eg. pilot lights, 
heaters, electric motors) some distance away, and then "flash back" to the point of product discharge 
causing an explosion and fire. This material may produce a floating fire hazard in extreme fire conditions. 
Vapours may form explosive mixtures with air. Reacts slowly with water or moist carbon dioxide to form 
extremely toxic and flammable hydrogen cyanide.  In some cases, this reaction may produce enough 
hydrogen cyanide to pose a health hazard, but not a flammability hazard.  (4) Spilled material may cause 
floors and contact surfaces to become slippery.
Unusual Fire or Explosion 
Hazards:
Not expected to be sensitive to mechanical impact.
Sensitivity to Mechanical Impact:
Not available.
Rate of Burning:
Not available.
Explosive Power:
Expected to be sensitive to static discharge when vapours are present between the lower and upper 
explosive limits.
Sensitivity to Static Discharge:
EXTINGUISHING MEDIA
Foam. Use carbon dioxide or dry chemical media for small fires.  If only water is available, use it in the 
form of a fog. Water may cause frothing if it gets below the surface of the liquid and turns to steam.  
Water fog gently applied to the surface may cause frothing which may extinguish the fire. This material 
may produce a floating fire hazard in extreme fire conditions.
Fire Extinguishing Media:
FIRE FIGHTING 
INSTRUCTIONS
Use water spray to cool fire-exposed containers or structures.  Use water spray to disperse vapours;  re-
ignition is possible. Isolate materials that are not involved in the fire and protect personnel.  Cool 
containers with flooding quantities of water until well after the fire is out.
Instructions to the Fire Fighters:
Use self-contained breathing apparatus and protective clothing.
Fire Fighting Protective 
Equipment:
6. ACCIDENTAL RELEASE MEASURES
Information in this section is for responding to spills, leaks or releases in order to prevent or minimize the adverse effects on persons, 
property and the environment.  There may be specific reporting requirements associated with spills, leaks or releases, which change from 
region to region.
In all cases of leak or spill contact vendor at Emergency Number shown on the front page of this MSDS. 
Wear protective clothing. Recover spilled material on non-combustible absorbents, such as sand or 
vermiculite, and place in covered containers for disposal. Use spark-resistant tools. Eliminate all sources 
of ignition.  Collect product for recovery or disposal.  For release to land, or storm water runoff, contain 
discharge by constructing dykes or applying inert absorbent;  for release to water, utilize damming and/or 
water diversion to minimize the spread of contamination.  Ventilate enclosed spaces.  Notify applicable 
government authority if release is reportable or could adversely affect the environment.
Containment and Clean-Up 
Procedures:
7. HANDLING AND STORAGE
HANDLING
Ground and bond equipment and containers to prevent a static charge buildup.  Use spark-resistant 
tools and avoid "splash-filling" of containers. Use normal "good" industrial hygiene and housekeeping 
practices. Containers exposed to heat may be under internal pressure.  These should be cooled and 
carefully vented before opening.  A face shield and apron should be worn. Vent container frequently, and 
more often in warm weather, to relieve pressure.
Handling Practices:
See Section 8, "Engineering Controls".
Ventilation Requirements:
Use only with adequate ventilation and avoid breathing vapours or mists. Avoid contact with eyes, skin or 
clothing.  Wash thoroughly with soap and water after handling.  Wash contaminated clothing thoroughly 
before re-use. Absorption via contact with skin, eyes and mucous membranes can contribute to the 
overall exposure.  Consider measures to prevent absorption by these routes. Store wiping rags and 
similar material in metal cans with tight fitting lids.
Other Precautions:
Hexane
Brenntag Canada Inc.
Date of Revision:
2009 January 21
WHMIS Number :
00060385
Page 4 of 8
STORAGE
See below.
Storage Temperature (°C):
Ventilation should be explosion proof.
Ventilation Requirements:
Store in a cool, well-ventilated area.  Keep away from heat, sparks and flames.  Keep containers closed.  
Do not expose sealed containers to temperatures above 40° C. Protect from direct sunlight. Protect 
against physical damage.
Storage Requirements:
Materials of construction for storing the product include:   stainless steel or mild steel. Attacks some 
types of rubber, plastics and coatings. Confirm suitability of any material before using.
Special Materials to be Used for 
Packaging or Containers:
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Recommendations listed in this section indicate the type of equipment, which will provide protection against overexposure to this product.  
Conditions of use, adequacy of engineering or other control measures, and actual exposures will dictate the need for specific protective 
devices at your workplace.
ENGINEERING CONTROLS
Local exhaust ventilation required.  Ventilation should be explosion proof. Make up air should be 
supplied to balance air that is removed by local or general exhaust ventilation. Ventilate low lying areas 
such as sumps or pits where dense vapours may collect.
For personnel entry into confined spaces (i.e. bulk storage tanks) a proper procedure must be followed.  
It must include consideration of, among other things, ventilation, testing of tank atmosphere, provision 
and maintenance of SCBA, and emergency rescue. Use the "buddy" system.  The second person should 
be in view and trained and equipped to execute a rescue.  (4)
Engineering Controls:
PERSONAL PROTECTIVE 
EQUIPMENT (PPE)
Safety glasses with side shields are recommended to prevent eye contact. Use full face-shield or 
chemical safety goggles when there is potential for contact. Contact lenses should not be worn when 
working with this material.
Eye Protection:
Gloves and protective clothing made from neoprene, nitrile rubber or PVC should be impervious under 
conditions of use.   Attacks some types of rubber, plastics and coatings. Do not use gloves or protective 
clothing made from butyl rubber, natural rubber or polyethylene. (4) Prior to use, user should confirm 
impermeability. Discard contaminated gloves.
Skin Protection:
No specific guidelines available. Do not use compressed oxygen in hydrocarbon atmospheres. A 
NIOSH/MSHA-approved air-purifying respirator equipped with organic vapour cartridges for 
concentrations up to 500 ppm n-Hexane. An air-supplied respirator if concentrations are higher or 
unknown.
n-Hexane: Immediately Dangerous to Life and Health (IDLH) value:   1, 100 ppm. (4) The purpose of 
establishing an IDLH value is to ensure that the worker can escape from a given contaminated 
environment in the event of failure of the most protective respiratory equipment.  In the event of failure of 
respiratory protective equipment, every effort should be made to exit immediately.  (4)
If while wearing a respiratory protection, you can smell, taste or otherwise detect anything unusual, or in 
the case of a full facepiece respirator you experience eye irritation, leave the area immediately.  Check to 
make sure the respirator to face seal is still good.  If it is, replace the filter, cartridge or canister.  If the 
seal is no longer good, you may need a new respirator.  (4)
Respiratory Protection:
Wear an impermeable apron and boots. Locate safety shower and eyewash station close to chemical 
handling area. Take all precautions to avoid personal contact. Clothing and footwear that is fire retardant 
and dissipates static electrical charges should be worn when handling flammable materials.  Natural 
fibers (cotton, wool, leather and linen) should be selected in favour of synthetic materials (rayon, nylon 
and polyester).
Skin Notation:  Contact with skin, eyes and mucous membranes can contribute to the overall exposure 
and may invalidate the TLV.  Consider measures to prevent absorption by these routes.
Other Personal Protective 
Equipment:
EXPOSURE GUIDELINES
SUBSTANCE
ACGIH TLV
(STEL)
OSHA PEL
(TWA)                   (STEL)
NIOSH REL
(TWA)                      (STEL)    
n-Hexane 
— 
500 ppm 
--- 
50 ppm 
--- 
Hexane, Isomers, other 
than n-hexane
1000 ppm 
--- 
--- 
100 ppm 
510 ppm (Ceiling)
Hexane
Brenntag Canada Inc.
Date of Revision:
2009 January 21
WHMIS Number :
00060385
Page 5 of 8
Liquid.
Clear, colourless liquid.
Hydrocarbon odour.
65 - 264.  Poor warning properties.  This is near the ACGIH TLV.
63 - 79.  (3)
-95.  (3)
> 120.  (3)
2.8.  (3)
0.66.  (3)
660 - 675 kg/m³ @ 15°C.  (3)
0.4 @ 25°C.
8.1 - 8.8 @ 20°C.
Practically insoluble in water.  0.95 - 1.4 mg / 100 ml @ 20 °C.  (4)  Soluble in ethanol, 
acetone, chloroform, diethyl ether and benzene.  Soluble in most organic solvents.
100.  (3)
Not available.
4.  (3)
84%.  (3)
Physical State:
Appearance:
Odour:
Odour Threshold (ppm):
Boiling Range (°C):
Melting/Freezing Point (°C):
Vapour Pressure (mm Hg at 20° C):
Vapour Density (Air = 1.0):
Relative Density (g/cc):
Bulk Density:
Viscosity:
Evaporation Rate (Butyl Acetate = 1.0):
Solubility:
% Volatile by Volume:
pH:
Coefficient of Water/Oil Distribution:
Volatile Organic Compounds (VOC):
9. PHYSICAL AND CHEMICAL PROPERTIES  (Not intended as Specifications)
-27.  (3)
Flashpoint (°C):
11. TOXICOLOGICAL INFORMATION
TOXICOLOGICAL DATA:
SUBSTANCE
LD50 (Oral, Rat)
LD50 (Dermal, Rabbit)
LC50 (Inhalation, Rat, 4h)
Solvent Naphtha (Petroleum) 
Light Aliphatic
> 17 300 mg/kg (3)
> 3 500 mg/kg (3)
> 73 680 ppm (3)
n-Hexane 
> 25 000 mg/kg (1,3)
> 2 000 mg/kg (3)
> 48 000 ppm (1)
Hexane, Isomers, other than 
n-hexane
> 5 000 mg/kg (3)
> 2 000 mg/kg (3)
--- 
The ingredient(s) of this product is (are) not classed as carcinogenic by ACGIH, IARC, OSHA or NTP.
Carcinogenicity Data:
n-Hexane may cause reproductive effects based on studies in laboratory animals at high generally toxic 
doses. See Section 11, "Other Studies Relevant to Material". See Below.
Reproductive Data:
No adverse mutagenic effects are anticipated.
Mutagenicity Data:
May cause teratogenic / embryotoxic effects based on studies in laboratory animals, but only at high, 
generally toxic doses. (3,4)
Teratogenicity Data:
None known.
Respiratory / Skin Sensitization 
Data:
10. STABILITY AND REACTIVITY
CHEMICAL STABILITY
Stable.
Under Normal Conditions:
Flammable.
Under Fire Conditions:
Will not occur.
Hazardous Polymerization:
High temperatures, sparks, open flames and all other sources of ignition.
Conditions to Avoid:
Strong oxidizers. ( Peroxides. Nitrates. Perchlorates. ) Lewis or mineral acids. Liquid oxygen. Chlorine. 
Product can react explosively with Dinitrogen Tetroxide and Fluorine. Attacks some types of rubber, 
plastics and coatings.
Materials to Avoid:
Thermal decomposition products are toxic and may include oxides of carbon and irritating gases.
Decomposition or Combustion 
Products:
Hexane
Brenntag Canada Inc.
Date of Revision:
2009 January 21
WHMIS Number :
00060385
Page 6 of 8
Hexane: A metabolite of n-Hexane is 2-Hexanone.  Coexposure of animals to 2-Hexanone and other 
aliphatic ketones (2-Butanone, 2-Pentanone, Heptanone, Octanone) potentiates 2-Hexanone 
neurotoxicity.  (Cassaret and Doull's Toxicology, 4th. Ed.)
Methyl Ethyl Ketone (MEK), Methyl Isobutyl Ketone (MIBK) and Lead Acetate are known to enhance the 
neurotoxicity of n-hexane or methyl-n-butyl ketone.  (3,4)  MEK by itself does not cause peripheral 
neuropathy.  Pulmonary lesions in rats were also reported to be enhanced by co-exposure to MEK.  Both 
toluene and xylene prevent testicular atrophy by n-hexane.  (4)  In animal studies, MEK and MIBK has 
been shown to potentiate the liver and kidney toxicity of haloalkanes, such as chloroform, carbon 
tetrachloride and 1,2-dichlorobenzene.  (3) Combined exposure to MEK and MIBK caused increased 
behavioural responses in baboons.  (4)
Synergistic Materials:
Two year inhalation studies with commercial Hexane at 900, 3,000 and 9,000 ppm produced a dose-
related increase in hepatocellular neoplasms in female mice.  No treatment-related tumours were 
observed in male mice or rats or female mice.  Commercial Hexane has not been identified as a 
carcinogen by NTP, IARC or OSHA.  (3)
Prolonged exposure to n-Hexane, a component of commercial Hexane, has resulted in adverse male 
reproductive effects in experimental animal studies, no adverse male reproductive effects were found in 
studies conducted with commercial Hexane.  (3)
Prolonged exposure to high concentrations of n-Hexane (above 1,000 ppm) has resulted in decreased 
sperm count and degenerative changes in the testes of rats but not those of mice.  (3)
Negative in bacterial tests (Ames test).  Inhalation of 100 ppm Hexane for 20 days or of 400 ppm for 5 
days caused an increase in the number of chromosomal changes in bone marrow cells of rats.  (4)
Chronic high level n-Hexane exposure damages the nervous system initially producing a lack of feeling 
in the extremities and possibly progressing to more severe nerve damage.  (3)
Abnormal colour perception and pigment changes in the eyes have been reported among industrial 
workers exposed to 423 to 1,280 pppm for 5 years or more.  (4)
Hexane caused mild eye irritation when tested in rabbits.  (4)
Mild forms of anemia have also been associated with exposure to Hexane.  These are temporary in 
nature.  (4)
Brief (10 minute) inhalation exposure at 1,500 ppm can cause irritation of the respiratory tract, nausea 
and headache.  At 5,000 ppm, dizziness and drowsiness can occur.  (3)
n-Hexane causes polyneuropathy or peripheral neuropathy.  The initial symptoms are symmetrical 
sensory numbness of distal portions of the extremities.  Motor weakness is typically observed in muscles 
of the toes and fingers but may also involve muscles of the arms, thighs, and forearms.  The onset of 
these symptoms may be delayed for several months after the beginning of exposure.  The syndrome is 
characterized by axonal swelling on the proximal side of the node of Ranvier, demyelination, and nerve 
fiber degeneration resembling a dying back neuropathy.  (Casarett and Doull's Toxicology, 1991, 
Pergamon Press)
Other Studies Relevant to 
Material:
12. ECOLOGICAL INFORMATION
Harmful to aquatic life at low concentrations. (3)
Ecotoxicity:
This product is biodegradable. Volatalizes rapidly. (3) This product has potential to bioaccumulate.  (3) 
Floats on water. Can be dangerous if allowed to enter drinking water intakes. Do not contaminate 
domestic or irrigation water supplies, lakes, streams, ponds, or rivers.
Environmental Fate:
13. DISPOSAL CONSIDERATIONS
None required.
Deactivating Chemicals:
This information applies to the material as manufactured. Reevaluation of the product may be required 
by the user at the time of disposal since the product uses, transformations, mixtures and processes may 
influence waste classification. Dispose of waste material at an approved (hazardous) waste 
treatment/disposal facility in accordance with applicable local, provincial and federal regulations.  Do not 
dispose of waste with normal garbage, or to sewer systems.
Waste Disposal Methods:
See "Waste Disposal Methods".
Safe Handling of Residues:
Hexane
Brenntag Canada Inc.
Date of Revision:
2009 January 21
WHMIS Number :
00060385
Page 7 of 8
Use spark-resistant tools. Empty containers retain product residue (liquid and/or vapour) and can be 
dangerous. Empty drums should be completely drained, properly bunged and promptly returned to a 
drum reconditioner. Do not expose such containers to heat, flame, sparks, static electricity, or other 
sources of ignition; they may explode and cause injury or death. Do not dispose of package until 
thoroughly washed out.
Disposal of Packaging:
14. TRANSPORTATION INFORMATION
CANADIAN TDG ACT SHIPPING DESCRIPTION:
HEXANES, Class 3, UN1208, PG II.
Label(s):  Flammable Liquids.          Placard:  Flammable Liquids.
ERAP Index: -----.
Exemptions: None known.
US DOT CLASSIFICATION (49CFR 172.101, 172.102):
HEXANES, Class 3, UN1208, PG II.
Label(s):  Flammable Liquid.          Placard:  Flammable Liquid.
CERCLA-RQ: 5000 lbs / 2270 kg
Exemptions: None known.
15. REGULATORY INFORMATION
CANADA
All constituents of this product are included on the DSL.
CEPA - NSNR:
Hexane.
CEPA - NPRI:
Controlled Products Regulations Classification (WHMIS):
16.  OTHER INFORMATION
REFERENCES
RTECS-Registry of Toxic Effects of Chemical Substances, Canadian Centre for Occupational Health and Safety RTECS 
database.
1.
Clayton, G.D. and Clayton, F.E., Eds., Patty's Industrial Hygiene and Toxicology, 3rd ed., Vol. IIA,B,C, John Wiley and Sons, New 
York, 1981.
2.
Supplier's Material Safety Data Sheet(s).
3.
CHEMINFO, through "CCINFOdisc", Canadian Centre for Occupational Health and Safety, Hamilton, Ontario, Canada.
4.
Guide to Occupational Exposure Values, 2007, American Conference of Governmental Industrial Hygienists, Cincinnati, 2007.
5.
Regulatory Affairs Group, Brenntag Canada Inc.
6.
The British Columbia Drug and Poison Information Centre, Poison Managements Manual, Canadian Pharmaceutical Association, 
Ottawa, 1981.
7.
____________________________________________________________________________________________________________
The information contained herein is offered only as a guide to the handling of this specific material and has been prepared in good faith by 
technically knowledgeable personnel.  It is not intended to be all-inclusive and the manner and conditions of use and handling may involve 
other and additional considerations.  No warranty of any kind is given or implied and Brenntag Canada Inc. will not be liable for any 
damages, losses, injuries or consequential damages which may result from the use of or reliance on any information contained herein.  
USA
All constituents of this product are included on the TSCA inventory.
Environmental Protection Act:
Flammable Liquid, Skin and Eye Irritant.
OSHA HCS (29CFR 1910.1200):
Text22:
NFPA:  1 Health,   3 Fire,   0 Reactivity   (3)
Text22:
HMIS:  1 Health,   3 Fire,   0 Reactivity   (6)
INTERNATIONAL
This product or its components are on the European inventory of existing commercial chemicals (EINECS).
B-2:  Flammable Liquid
D-2B:  Toxic (skin and eye irritant)
Hexane
Brenntag Canada Inc.
Date of Revision:
2009 January 21
WHMIS Number :
00060385
Page 8 of 8
This Material Safety Data Sheet is valid for three years.
____________________________________________________________________________________________________________
To obtain revised copies of this or other Material Safety Data Sheets, contact your nearest Brenntag Canada Regional office.
British Columbia:  20333-102B Avenue, Langley, BC, V1M 3H1
         Phone:  (604) 513-9009         Facsimile:  (604) 513-9010
Alberta:   6628 - 45 th. Street, Leduc, AB, T9E 7C9
         Phone:  (780) 986-4544         Facsimile:  (780) 986-1070
Manitoba:  681 Plinquet Street, Winnipeg, MB, R2J 2X2
         Phone:  (204) 233-3416         Facsimile:  (204) 233-7005
Ontario:  43 Jutland Road, Toronto, ON, M8Z 2G6
         Phone:  (416) 259-8231         Facsimile:  (416) 259-5333
Quebec:  2900 Jean Baptiste Des., Lachine, PQ, H8T 1C8
         Phone:  (514) 636-9230         Facsimile:  (514) 636-0877
Atlantic:  A-105 Akerley Boulevard, Dartmouth, NS, B3B 1R7
         Phone:  (902) 468-9690         Facsimile:  (902) 468-3085
____________________________________________________________________________________________________________
Prepared By:  Regulatory Affairs Group, Brenntag Canada Inc., (416) 259-8231.
</p>