Loading ...
Global Do...
Technology & Engineering
Technology
14
0
Try Now
Log In
Pricing
12806942.2 EXHIBIT P USB Logo Usage Guidelines © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. USB Logo Usage Guidelines USB Performance-only Packaging, Cable and Port Logos USB Performance + Charging Cable and Port Logos USB Charging-only Packaging and Product Logos USB Logo Usage Guidelines 2 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Introduction The Universal Serial Bus (USB) has gone beyond its original intent to connect peripherals to PCs and is now a dominate standard in the interconnect market. USB can be found everywhere from PCs to consumer electronics to mobile devices. Because of its ease of use, speed and expandability, USB is the preferred connection for many consumers. This presents a continued market opportunity for the future. In order to realize this opportunity, USB products must continue to enhance the consumers' experience through high quality and ease of use. That's why USB Implementers Forum, Inc. (USB-IF) developed trademark-protected USB Logo(s), SuperSpeed USB Logo(s), SuperSpeed USB 10 Gbps Logo(s), USB Type-CTM Charging Trident Logo(s), the Certified USB Charger Logo(s), and the Certified USB Fast Charger Logo(s) for use by qualified parties. To qualify for the right to display these logos, products must pass the specified USB-IF compliance testing for product quality. USB Logo Usage Guidelines 3 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Table of Contents Logos 5 Logo Usage 18 Basic-Speed USB Versions Hi-Speed USB Versions SuperSpeed USB Version SuperSpeed USB 10 Gbps Version SuperSpeed USB Trident SuperSpeed USB 10 Gbps Trident USB Type-CTM Charging Trident Logos Certified USB Charger Logo Certified USB Fast Charger Logo Logo Color 27 Logo Don’ts 37 Layout 41 Packaging Collateral Advertisements Manuals Art Files 43 USB Logo Usage Guidelines 4 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. General Logo Usage Guidelines Your company name, logo, or product name must appear on any products or related materials where the USB Logo(s), the SuperSpeed USB Logo(s), the SuperSpeed USB 10 Gbps Logo(s), the USB Type-CTM Charging Trident Logo(s), the Certified USB Charger Logo(s), or the Certified USB Fast Charger Logo(s) are used. The Logos cannot be larger or more prominent than your product name, trademark, logo, or company name. You must use the logos exactly as they are shown in the USB-IF digital artwork files; you may not imitate the USB Logo(s), the SuperSpeed USB Logo(s), the SuperSpeed USB 10 Gbps Logo(s), the USB Type-CTM Charging Trident Logo(s), the Certified USB Charger Logo(s), or the Certified USB Fast Charger Logo(s) in any of your materials. You may not combine the USB Logo(s), the SuperSpeed USB Logo(s), the SuperSpeed USB 10 Gbps Logo(s), the USB Type-CTM Charging Trident Logo(s), the Certified USB Charger Logo(s), or the Certified USB Fast Charger Logo(s) with any other feature, including other marks, words, graphics, photos, slogans, numbers, design features, or symbols. The USB Logo(s), the SuperSpeed USB Logo(s), the SuperSpeed USB 10 Gbps Logo(s), the USB Type-CTM Charging Trident Logo(s), the Certified USB Charger Logo(s), or the Certified USB Fast Charger Logo(s) may not be used as a design feature on any of your materials. IMPORTANT: Please refer to the USB-IF Trademark License Agreement Mark Requirements Chart for details regarding the USB-IF Test Procedures and other requirements. USB Logo Usage Guidelines 5 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. The Basic-Speed USB Logo must be used with Basic-Speed (12 Mbps or 1.5 Mbps) Product. The Hi-Speed USB Logo must be used with Hi-Speed (480 Mbps) Product. THE HI-SPEED VERSIONS OF THE LOGOS CANNOT BE USED WITH BASIC- SPEED PRODUCT. The Basic-Speed USB Logo and the Hi-Speed USB Logo may be reproduced only in the versions shown in this document and may not be altered in any way. Please note that the trademark (™ & ®) and the word “certified”are integral parts of the Logos. They are considered part of the Logo art and should not be altered in any way. The Logos must be reproduced from the USB-IF digital artwork files. Basic-Speed USB Hi-Speed USB Logos USB Logo Usage Guidelines 6 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. The SuperSpeed USB Logo must be used solely in conjunction with Product that signals at 5 Gbps, that has been submitted to and passed the USB-IF Test Procedure for SuperSpeed USB products, and that has been posted on the USB-IF Integrators List. The SuperSpeed USB 10 Gbps Logo must be used solely in conjunction with Product that signals at 10 Gbps, that has been submitted to and passed the USB-IF Test Procedure for SuperSpeed USB 10 Gbps products, and that has been posted on the USB-IF Integrators List. The SuperSpeed USB Logo may be reproduced only in the versions shown in this document and may not be altered in any way. Please note that the trademark (®) and the word “certified” are integral parts of the Logos. They are considered part of the Logo art and should not be altered in any way. The Logos must be reproduced from the USB-IF digital artwork files. The SuperSpeed USB 10 Gbps Logo may be reproduced only in the versions shown in this document and may not be altered in any way. Please note that the trademark (®), the word “certified”, the plus “+” label and the “10 Gbps” label are integral parts of the Logos. They are considered part of the Logo art and should not be altered in any way. The Logos must be reproduced from the USB-IF digital artwork files. SuperSpeed USB Logos SuperSpeed USB 10 Gbps USB Logo Usage Guidelines 7 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. The USB-IF SuperSpeed USB Trident Logo may be used solely in conjunction with Product consisting of a hub, peripheral device, add-in card, motherboard, or cable and connector assembly (anything that is not a USB Host end product) that signals at 5 Gbps, that has been submitted to and passed the SuperSpeed USB Test Procedure, and that has been posted on the USB-IF Integrators List; or solely in conjunction with Product not consisting of a hub, peripheral device, add-in card, motherboard, or cable and connector assembly, that is based on and compliant with the USB-IF USB 3.2 specification. The USB-IF SuperSpeed USB 10 Gbps Trident Logo may be used solely in conjunction with Product consisting of a hub, peripheral device, add-in card, motherboard, or cable and connector assembly (anything that is not a USB Host end product) that signals at 10 Gbps, that has been submitted to and passed the SuperSpeed USB 10 Gbps Test Procedure, and that has been posted on the USB-IF Integrators List; or solely in conjunction with Product not consisting of a hub, peripheral device, add-in card, motherboard, or cable and connector assembly, that is based on and compliant with the USB-IF USB 3.2 specification. SuperSpeed USB Trident Logo Logos SuperSpeed USB 10 Gbps Trident Logo USB Logo Usage Guidelines 8 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. The USB-IF USB Type-C™ Charging Trident Logo may be used solely in conjunction with Product consisting of hub, peripheral device, add-in card, motherboard, or cable and connector assembly (anything that is not a USB Host end product) that has been submitted to and passed the Basic or Hi-Speed Test Procedure and USB Type-CTM testing requirements (see USB Compliance Program website for all test procedures); or with Product not consisting of hub, peripheral device, add-in card, motherboard, or cable and connector assembly that is based on and compliant with the USB-IF USB Type-CTM specification and the appropriate USB Power Delivery specification. The USB-IF USB Type-CTM Charging Trident Logo may also be used solely in conjunction with Product where no USB data signaling is present, that has been submitted to and passed USB Type-CTM testing requirements (see USB Compliance Program website for all test procedures) and that has been posted on the USB-IF Integrators List. USB Power Delivery Trident Logo Logos USB Type-CTM Charging Trident Logo USB Logo Usage Guidelines 9 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. SuperSpeed USB Type-CTM Charging Trident Logo The USB-IF SuperSpeed USB Type-CTM Charging Trident Logo may be used solely in conjunction with Product consisting of hub, peripheral device, add-in card, motherboard, or cable and connector assembly (anything that is not a USB Host end product) that has that has been submitted to and passed the SuperSpeed USB Test Procedure and USB Type-CTM testing requirements (see USB Compliance Program website for all test procedures); or with Product not consisting of hub, peripheral device, add-in card, motherboard, or cable and connector assembly, that is based on and compliant with the USB-IF USB Type-CTM specification, the USB 3.2 specification, and the appropriate USB Power Delivery specification. Logos USB Logo Usage Guidelines 10 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. SuperSpeed USB 10 Gbps USB Type-CTM Charging Trident Logo The USB-IF SuperSpeed USB 10 Gbps USB Type-CTM Charging Trident Logo may be used solely in conjunction with Product consisting of hub, peripheral device, add-in card, motherboard, or cable and connector assembly (anything that is not a USB Host end product) that has that has been submitted to and passed the SuperSpeed USB 10 Gbps Test Procedure and USB Type-CTM testing requirements (see USB Compliance Program website for all test procedures); or with Product not consisting of hub, peripheral device, add-in card, motherboard, or cable and connector assembly, that is based on and compliant with the USB-IF USB Type-CTM specification, the USB 3.2 specification, and the appropriate USB Power Delivery specification. Logos USB Logo Usage Guidelines 11 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logos The USB-IF Certified USB Charger Logo and Certified USB Fast Charger Logo are available with various wattage labels. Companies should contact admin@usb.org with specific requests. The Certified USB Charger Logo and Certified USB Fast Charger Logo must be used solely in conjunction with Product that has been submitted to and passed the appropriate USB-IF Test Procedures and that has been posted on the USB-IF Integrators List. The Certified USB Charger Logo and Certified USB Fast Charger Logo may be reproduced only in the versions shown in this document and may not be altered in any way. Please note that the trademark (™) and the wattage number are integral parts of the Logo(s). They are considered part of the Logo art and should not be altered in any way. The Logo(s) must be reproduced from the USB-IF digital artwork files. The Certified USB Charger Logo and Certified USB Fast Charger Logo must be used solely in conjunction with Product as defined in the usage guidelines. Certified USB Chargers must comply with one of the Certified USB Charger Categories defined in the USB Logo Usage Guidelines. Certified USB Charger Logo Certified USB Fast Charger Logo USB Logo Usage Guidelines 12 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logos Certified USB Charger Categories Category 1 - Single-port Assured Capacity USB Type-CTM Charger Category 2 - Multi-port Assured Capacity USB Type-CTM Charger Category 3 - Multi-port Shared Capacity USB Type-CTM Charger Category 4 - Multi-port USB Type-CTM Charger with at least one USB Standard-A port Category 5 - Multi-port USB Type-CTM Charger with both Assured and Shared ports USB Logo Usage Guidelines 13 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logos Single-port Assured Capacity USB Type-CTM Charger • • • The Product must have a single USB Type-CTM port and no other USB Charging ports. The USB Type-CTM port must be labeled to identify the power supplied. The USB Type-CTM port must supply the stated power level. The Certified USB Charger Logo wattage label must define the power level of the USB Type-CTM port. • Requirements: The Product must meet the appropriate requirements as defined in the USB-IF Trademark License Agreement Mark Requirements Chart for either the Certified USB Charger Logo or the Certified USB Fast Charger Logo. • 45 W Example: 45W Single-port Assured Capacity USB Type-CTM Charger or USB Type-CTM port wattage label Packaging and/or Product Logo Category 1 USB Logo Usage Guidelines 14 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logos Multi-port Assured Capacity USB Type-CTM Charger The Product must have multiple USB Type-CTM ports and no other USB Charging ports. Each USB Type-CTM port must behave independently and be unaffected by the status and loading of the other ports. Each USB Type-CTM port must be labeled to identify the power supplied. Each USB Type-CTM port must supply the stated power capability, independent of the status and loading of the other ports. The Certified USB Charger Logo wattage label must define the USB Type-CTM port that supplies the highest power. Requirements: • • • • • The Product must meet the appropriate requirements as defined in the USB-IF Trademark License Agreement Mark Requirements Chart for either the Certified USB Charger Logo or the Certified USB Fast Charger Logo. • Example: 45W Multi-port Assured Capacity USB Type-CTM Charger 45 W 15 W 15 W USB Type-CTM port labels or Packaging and/or Product Logo Category 2 USB Logo Usage Guidelines 15 © 2000-2016 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logos Product must have multiple USB Type-CTM ports and no other USB Charging ports. • • • Each USB Type-CTM port must be labeled to identify the highest capable power level. Prior to any USB Type-CTM ports being connected to a power sink, each USB Type-CTM port must be capable of the same maximum power capability. Each USB Type-CTM port is not required to supply the stated power level at all times. As USB Type-CTM ports are connected and a power contract is established, the remaining unconnected USB Type-CTM ports must equally offer the remaining available power capability. • The Product labeling and packaging must inform consumers that when a single port is supplying the highest power rating, the remaining ports will supply different power ratings. • The total combined power level must be indicated on the Product. Multi-port Shared Capacity USB Type-CTM Charger Requirements: • • 60 W 45 W 45 W 45 W The Product must meet the appropriate requirements as defined in the USB-IF Trademark License Agreement Mark Requirements Chart for either the Certified USB Charger Logo or the Certified USB Fast Charger Logo. • Example: 45W Multi-port Shared Capacity USB Type-CTM Charger USB Type-CTM port labels or Packaging and/or Product Logo Category 3 USB Logo Usage Guidelines 16 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logos • Each USB Type-CTM port must be labeled according to the appropriate Certified USB Charger Category. • Each USB Type-CTM port must supply the power level according to the appropriate Certified USB Charger Category. • The Certified USB Charger Logo wattage label must define the USB Type-CTM port according to the appropriate Certified USB Charger Category. • Category 4 Multi-port USB Type-CTM Charger with at least one USB Standard-A port Requirements: Products that also include USB Standard-A ports are required to supply a minimum of 4.5W. The Product must meet the appropriate requirements as defined in the USB-IF Trademark License Agreement Mark Requirements Chart for either the Certified USB Charger Logo or the Certified USB Fast Charger Logo. • Examples: 45W Multi-port USB Type-CTM Chargers with at least one USB Standard-A port 60 W 45 W 45 W 45 W 45 W 45 W 45 W USB Type-CTM port labels USB Type-CTM port labels or Packaging and/or Product Logo USB Logo Usage Guidelines 17 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logos • Each USB Type-CTM port must be labeled according to the appropriate Certified USB Charger Category. • Each USB Type-CTM port must supply the power level according to the appropriate Certified USB Charger Category. • • Category 5 Multi-port USB Type-CTM Charger with both Assured and Shared ports Requirements: Products that also include USB Standard-A ports are required to supply a minimum of 4.5W. The Product must meet the appropriate requirements as defined in the USB-IF Trademark License Agreement Mark Requirements Chart for either the Certified USB Charger Logo or the Certified USB Fast Charger Logo. • Example: 45W Multi-port USB Type-CTM Assured and Shared Port Charger with USB Standard-A ports 27 W 15 W 15 W Shared USB Type-CTM ports Assured USB Type-CTM ports or Packaging and/or Product Logo The Certified USB Charger Logo wattage label must define the single USB Type-CTM port that supplies the highest wattage. 60 W 45 W 45 W 45 W USB Logo Usage Guidelines 18 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Basic-Speed USB Version To be effective, the USB-IF Basic-Speed USB Logo must be treated appropriately and consistently. Clear space, minimum size, and Logo position requirements must be followed. Clear Space Avoid visual clutter by maintaining a minimum amount of clear space around the Logo that is equal to the height of the blue bar that contains the word “certified” for the size selected. Please note that when the Logo reverses out of a dark background, it includes a key line around it. The clear space does not include the key line. Minimum Size for Print The minimum width is 0.5 inch (13 mm) and the minimum height is 0.17 inch (4.3 mm). Minimum Size for On-Screen The minimum width of the Logo is 100 pixels. The supplied on-screen Logos are created with the clear space built into the files. The smallest file available (100 pixels) is set to the minimum size requirement and should not be scaled down. Logo Position To position the Logo correctly, use the left corner of the Logo as the vertical guideline. Use the top edge of the Logo as the horizontal guideline. Logo Usage 0.17 inch 0.5 inch 100 pixels USB Logo Usage Guidelines 19 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Hi-Speed USB Version These requirements apply to use of the USB-IF Hi-Speed USB Logo. Clear Space Avoid visual clutter by maintaining a minimum amount of clear space around the Logo that is equal to the height of the blue bar that contains the word “certified” for the size selected. Please note that when the Logo reverses out of a dark background, it includes a key line around it. The clear space does not include the key line. Minimum Size for Print The minimum width is 0.5 inch (13 mm) and the minimum height is 0.23 inch (5.85 mm). Minimum Size for On-Screen The minimum width of the Logo is 100 pixels. The supplied on-screen Logos are created with the clear space built into the files. The smallest file available (100 pixels) is set to the minimum size requirement and should not be scaled down. Logo Position To position the Logo correctly, use the left corner of the Logo as the vertical guideline. Use the top edge of the Logo as the horizontal guideline. Logo Usage 0.23 inch 0.5 inch 100 pixels USB Logo Usage Guidelines 20 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. SuperSpeed USB Version These requirements apply to use of the USB-IF SuperSpeed USB Logo. Clear Space Avoid visual clutter by maintaining a minimum amount of clear space around the Logo that is equal to the height of the white space that contains the word “certified” for the size selected. Please note that when the Logo reverses out of a dark background, it includes a key line around it. The clear space does not include the key line. Minimum Size for Print The minimum width of the Logo is 0.75 inch (19 mm) and the minimum height for the Logo is 0.38 inch (9.8 mm). Minimum Size for On-Screen The minimum width of the Logo is 125 pixels. The supplied on-screen Logos are created with the clear space built into the files. The smallest file available (125 pixels) is set to the minimum size requirement and should not be scaled down. Logo Position To position the Logo correctly, use the upper left corner top arrow as the vertical guideline. Use the top edge of the word SUPERSPEED as the horizontal guideline. Logo Usage 125 pixels 0.75 inch 0.38 inch USB Logo Usage Guidelines 21 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Usage SuperSpeed USB 10 Gbps Version These requirements apply to use of the USB-IF SuperSpeed USB 10 Gbps Logo. Clear Space Avoid visual clutter by maintaining a minimum amount of clear space around the Logo that is equal to the height of the white space that contains the word “certified” for the size selected. Please note that when the Logo reverses out of a dark background, it includes a key line around it. The clear space does not include the key line. Minimum Size for Print The minimum width of the Logo is 0.75 inch (19 mm) and the minimum height for the Logo is 0.4 inch (10.16 mm). Minimum Size for On-Screen The minimum width of the Logo is 125 pixels. The supplied on-screen Logos are created with the clear space built into the files. The smallest file available (125 pixels) is set to the minimum size requirement and should not be scaled down. Logo Position To position the Logo correctly, use the upper left corner top arrow as the vertical guideline. Use the top edge of the word SUPERSPEED + as the horizontal guideline. 125 pixels 0.75 inch 0.4 inch USB Logo Usage Guidelines 22 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. SuperSpeed USB Trident Logo These requirements apply to use of the USB-IF SuperSpeed USB Trident Logo. Please note that the SuperSpeed USB Trident Logo is only to be used on cables and devices. Clear Space Avoid visual clutter by maintaining a minimum amount of clear space around the Logo that is equal to the width of the square of the trident for the size selected. Minimum Sizes The minimum size of the largest dimension of the Logo is 5mm (0.2 inches). Measurement does not include the “®”. Logo Position The Logo can be oriented horizontally with the SS on the left or vertically with the SS at the bottom. Logo Usage 5 mm. Licensee is not obligated to use the “Circle R ®” and may omit the registered trademark ® symbol on the SuperSpeed USB Trident Logo for mobile and non-mobile Product, for which the Licensee is printing/engraving on chassis where the reasonable alternatives for the location and size of the Logo do not allow for the symbol to have a maximum dimension of 15mm or more. This permission is limited only to these exact situations. Where the symbol is so omitted, the manufacture/Licensees must include the following statement in their user’s manual/printed materials accompanying the Product: “The SuperSpeed USB Trident Logo is a registered trademark of USB Implementers Forum, Inc.” and must be accompanied with the image of the mark with the correct rendering of the ®. USB Logo Usage Guidelines 23 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Usage SuperSpeed USB 10 Gbps Trident Logo These requirements apply to the use of the USB-IF SuperSpeed USB 10 Gbps Trident Logo. Please note that the SuperSpeed USB 10 Gbps Trident Logo is only to be used on cables and devices. Clear Space Avoid visual clutter by maintaining a minimum amount of clear space around the Logo that is equal to the width of the square of the trident for the size selected. Minimum Sizes The minimum size of the largest dimension of the Logo is 5mm (0.2 inches). Measurement does not include the “®”. Logo Position The Logo can be oriented horizontally with the SS on the left or vertically with the SS at the bottom. 5 mm. Licensee is not obligated to use the “Circle R ®” and may omit the registered trademark ® symbol on the SuperSpeed USB 10 Gbps Trident Logo for mobile and non-mobile Product, for which the Licensee is printing/engraving on chassis where the reasonable alternatives for the location and size of the Logo do not allow for the symbol to have a maximum dimension of 15mm or more. This permission is limited only to these exact situations. Where the symbol is so omitted, the manufacture/Licensees must include the following statement in their user’s manual/printed materials accompanying the Product: “The SuperSpeed USB 10 Gbps Trident Logo is a registered trademark of USB Implementers Forum, Inc.” and must be accompanied with the image of the mark with the correct rendering of the ®. USB Logo Usage Guidelines 24 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. USB Type-CTM Charging Trident Logos These requirements apply to use of the USB-IF USB Type-CTM Charging Trident Logos. Clear Space Avoid visual clutter by maintaining a minimum amount of clear space around the Logo that is equal to the width of the battery terminal for the size selected. Minimum Size The minimum size of the largest dimension of the Logo is 5mm (0.2 inches). Measurement does not include the “TM”. Logo Position The Logo can be oriented horizontally with the battery terminal to the right or vertically with the battery terminal to the top. Logo Usage 5 mm 5 mm 5 mm Licensee in not obligated to use the “TM” and may omit the trademark TM symbol on the USB Type-CTM Charging Trident Logos for mobile and non-mobile Product, for which the Licensee is printing/engraving on chassis where the reasonable alternatives for the location and size of the Logos do not allow for the symbol to have a maximum dimension of 15mm or more. This permission is limited only to these exact situations. Where the symbol is so omitted, the manufacture/Licensees must include the following statement in their user’s manual/ printed materials accompanying the Product: “The USB Type-CTM Charging Trident Logos are trademarks of USB Implementers Forum, Inc.” and must be accompanied with the proper USB Type-CTM Charging Trident image of the mark with the correct rendering of the TM. USB Logo Usage Guidelines 25 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Usage Certified USB Charger Logo These requirements apply to use of the Certified USB Charger Logo. Clear Space Avoid visual clutter by maintaining a minimum amount of clear space around the Logo that is equal to the height of the word “certified”. Minimum Size for Print The minimum width of the Logo is 0.75 inch (19 mm) and the minimum height for the Logo is 0.48 inch (12.15 mm). Minimum Size for On-Screen The minimum width of the Logo is 125 pixels. The supplied on-screen Logos are created with the clear space built into the files. The smallest file available (125 pixels) is set to the minimum size requirement and should not be scaled down. Logo Position To position the Logo correctly, use the left edge of the word “charger” as the vertical guideline. Use the top of the lightning bolt symbol as the horizontal guideline. 125 pixels 0.75 inch 0.48 inch USB Logo Usage Guidelines 26 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Usage Certified USB Fast Charger Logo These requirements apply to use of the Certified USB Fast Charger Logo. Clear Space Avoid visual clutter by maintaining a minimum amount of clear space around the Logo that is equal to the height of the word “certified”. Minimum Size for Print The minimum width of the Logo is 0.75 inch (19 mm) and the minimum height for the Logo is 0.48 inch (12.15 mm). Minimum Size for On-Screen The minimum width of the Logo is 125 pixels. The supplied on-screen Logos are created with the clear space built into the files. The smallest file available (125 pixels) is set to the minimum size requirement and should not be scaled down. Logo Position To position the Logo correctly, use the left edge of the word “fast” as the vertical guideline. Use the top of the lightning bolt symbol as the horizontal guideline. 125 pixels 0.75 inch 0.48 inch USB Logo Usage Guidelines 27 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color Basic-Speed USB Logo The USB-IF Basic-Speed USB Logo has been created as a 1-color Logo. (Other color versions are shown on the following pages). It is best to reproduce the Logo using the PANTONE® numbers shown at the right. When reproducing these colors in 4-color process inks, or on screen (RGB), the screen tints listed here should be used. Different color models may reproduce the USB Blue with slight color variations, e.g., a Logo printed using USB Blue as a spot color may result in a slightly different hue of blue when compared to one printed using 4-color process or compared to an on screen (RGB) Logo. PANTONE® 653C USB Blue Use PANTONE® 653C 4-color Cyan 100% Magenta 62% Yellow 0% Black 20% RGB Red 0 Green 82 Blue 149 PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. USB Logo Usage Guidelines 28 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color Hi-Speed USB Logo The USB-IF Hi-Speed USB Logo has been created as a 2-color Logo. (Other color versions are shown on the following pages). It is best to reproduce the Logo using the PANTONE® numbers shown at the right. When reproducing these colors in 4-color process inks, or on screen (RGB), the screen tints listed here should be used. Different color models may reproduce the USB Red and USB Blue with slight color variations, e.g. a Logo printed using USB Red as a spot color may result in a slightly different hue of red when compared to one printed using 4-color process or compared to an on screen (RGB) Logo. PANTONE® 185C PANTONE® 653C USB Red Use PANTONE® 185C 4-color Cyan 0% Magenta 91% Yellow 76% Black 0% RGB Red 239 Green 62 Blue 66 USB Blue Use PANTONE® 653C 4-color Cyan 100% Magenta 62% Yellow 0% Black 20% RGB Red 0 Green 82 Blue 149 PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. USB Logo Usage Guidelines 29 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color SuperSpeed USB Logo The USB-IF SuperSpeed USB Logo has been created as a 2-color Logo. (Other color versions are shown on the following pages). It is best to reproduce the Logo using the PANTONE® numbers shown at the right. When reproducing these colors in 4-color process inks, or on screen (RGB), the screen tints listed here should be used. Different color models may reproduce the USB Red and USB Blue with slight color variations, e.g., a Logo printed using USB Red as a spot color may result in a slightly different hue of red when compared to one printed using 4-color process or compared to an on screen (RGB) Logo. USB Red Use PANTONE® 185C 4-color Cyan 0% Magenta 91% Yellow 76% Black 0% RGB Red 239 Green 62 Blue 66 USB Blue Use PANTONE® 653C 4-color Cyan 100% Magenta 62% Yellow 0% Black 20% RGB Red 0 Green 82 Blue 149 PANTONE® 185C PANTONE® 653C PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. USB Logo Usage Guidelines 30 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color SuperSpeed USB 10 Gbps Logo The USB-IF SuperSpeed USB 10 Gbps Logo has been created as a 2-color Logo. (Other color versions are shown on the following pages). It is best to reproduce the Logo using the PANTONE® numbers shown at the right. When reproducing these colors in 4-color process inks, or on screen (RGB), the screen tints listed here should be used. Different color models may reproduce the USB Red and USB Blue with slight color variations, e.g., a Logo printed using USB Red as a spot color may result in a slightly different hue of color red when compared to one printed using 4-color process or compared to an on- screen (RGB) Logo. USB Red Use PANTONE® 185C 4-color Cyan 0% Magenta 91% Yellow 76% Black 0% RGB Red 239 Green 62 Blue 66 USB Blue Use PANTONE® 653C 4-color Cyan 100% Magenta 62% Yellow 0% Black 20% RGB Red 0 Green 82 Blue 149 PANTONE® 185C PANTONE® 653C PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. USB Logo Usage Guidelines 31 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color Certified USB Charger Logo and Certified USB Fast Charger Logo The USB-IF Certified USB Charger Logo(s) have been created as 3-color Logos. (Other color versions are shown on the following pages). It is best to reproduce the Logo(s) using the PANTONE® numbers shown at the right. When reproducing these colors in 4-color process inks, or on screen (RGB), the screen tints listed here should be used. Different color models may reproduce the USB Red, USB Blue and Gray with slight color variations, e.g., a Logo printed using USB Red as a spot color may result in a slightly different hue of red when compared to one printed using 4-color process or compared to an on screen (RGB) Logo. Wattage Gray 70% Black 4-color Cyan 0% Magenta 0% Yellow 0% Black 70% RGB Red 120 Green 120 Blue 120 USB Red Use PANTONE® 185C 4-color Cyan 0% Magenta 91% Yellow 76% Black 0% RGB Red 239 Green 62 Blue 66 USB Blue Use PANTONE® 653C 4-color Cyan 100% Magenta 62% Yellow 0% Black 20% RGB Red 0 Green 82 Blue 149 PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. PANTONE® 653C PANTONE® 185C PANTONE® 185C 70% Black PANTONE® 185C PANTONE® 185C PANTONE® 653C 70% Black USB Logo Usage Guidelines 32 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color Basic-Speed USB Versions Basic-Speed USB Logo The USB-IF Basic-Speed USB Logo has been created as a 1-color Logo. The 1-color (USB Blue) version is the preferred version of the Basic-Speed USB Logo. The 1-color, black, version of the Basic- Speed USB Logo should be used for single-color applications. Choose either the reversed version of the Basic-Speed USB Logo, or the 1-color (USB Blue) version when the Basic-Speed USB Logo is used on a dark background. A key line has been added to the 1-color (USB Blue) version to ensure readability over a background of color. 1-Color Logo USB Blue PANTONE® 653C 1-Color Logo Black Reverse Logo On a dark colored background 1-Color Logo On a dark colored background PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. USB Logo Usage Guidelines 33 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color Hi-Speed USB Versions Hi-Speed USB Logo The 2-color version is the preferred version of the USB-IF Hi-Speed USB Logo. The 1-color, black version of the Hi- Speed USB Logo should be used for single-color applications. Choose either the reversed version of the Hi-Speed USB Logo, or the 2-color version when the Hi-Speed USB Logo is used on a dark background. A key line has been added to the 2-color version to ensure readability over a background of color. 2-Color Logo USB Red PANTONE® 185 USB Blue PANTONE® 653 1-Color Logo Black Reverse Logo On a dark colored background 2-Color Logo On a dark colored background PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. USB Logo Usage Guidelines 34 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color SuperSpeed USB Versions SuperSpeed USB Logo The 2-color version is the preferred version of the USB-IF SuperSpeed USB Logo. The 1-color, black, version of the SuperSpeed USB Logo should be used for single-color applications. Choose either the reversed version of the SuperSpeed USB Logo, or the 2-color version when the SuperSpeed USB Logo is used on a dark background. A key line has been added to the 2-color version to ensure readability over a background of color. 2-Color Logo USB Red PANTONE® 185C USB Blue PANTONE® 653C 1-Color Logo Black Reverse Logo On a dark colored background 2-Color Logo On a dark colored background PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. USB Logo Usage Guidelines 35 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color SuperSpeed USB 10 Gbps Versions SuperSpeed USB 10 Gbps Logo The 2-color version is the preferred version of the USB-IF SuperSpeed USB 10 Gbps Logo. The 1-color, black, version of the SuperSpeed USB 10 Gbps Logo should be used for single-color applications. Choose either the reversed version of the SuperSpeed USB 10 Gbps Logo, or the 2-color version when the SuperSpeed USB 10 Gbps Logo is used on a dark background. A key line has been added to the 2-color version to ensure readability over a background of color. 2-Color Logo USB Red PANTONE® 185C USB Blue PANTONE® 653C 1-Color Logo Black Reverse Logo On a dark colored background 2-Color Logo On a dark colored background PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. USB Logo Usage Guidelines 36 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Color Certified USB Charger and Certified USB Fast Charger Versions Certified USB Charger Logo(s) The 3-color version is the preferred version of the USB-IF Certified USB Charger Logo(s). The 1-color, black, blue or red version of the Certified USB Charger Logo(s) should be used for single-color applications. Choose the reversed version of the Certified USB Charger Logo when the it is used on a dark background. 3-Color Logo USB Red PANTONE® 185C USB Blue PANTONE® 653C 70% Black 1-Color Logo Black 1-Color Logo Blue PANTONE® 653C 1-Color Logo Red PANTONE® 185C Reverse Logo On a dark colored background PANTONE Colors displayed here may not match PANTONE-identified standards. Consult current PANTONE Color Publications for accurate color. PANTONE® is the property of Pantone, Inc. USB Logo Usage Guidelines 37 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Proper use of the USB Logos strengthens its effectiveness each time they are seen. The following examples depict unacceptable uses of the USB Logos for both print and on screen applications. Note: The “Logo don’ts” guidelines apply to all of the Logo versions. Don’t place the Logo on a busy background. A busy background would not follow the clear space guidelines, spelled out earlier in this document. Don’t change the colors of the Logo. Don’t use any Hi-Speed version of the Logos without the word “Hi-Speed.” Logo Don’ts Don’t use any version of the Logos without the word “certified.” Don’t use the Logo without the trademark (™) or ® symbol. Don’t use the Logo without the word “CERTIFIED”. Don’t use the Logo without the word “SUPERSPEED”. USB Logo Usage Guidelines 38 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Logo Don’ts Note: The “Logo don’ts” guidelines apply to all of the Logo versions. Don’t use the Logo without the word “SUPERSPEED +”. Don’t use the Logo without the word “10 Gbps”. Don’t use the Logo without the word “CERTIFIED”. Don’t use the Logo without the wattage label. Don’t use the Logo without the “TM” symbol. Don’t use the Logo without the word “CERTIFIED”. USB Logo Usage Guidelines 39 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. ALL NEW Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec faucibus erat ut efficitur vehicula. Quisque ut purus venenatis, commodo quam id, vulputate mi. Vivamus velit mi, elementum a magna a, placerat suscipit tellus. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Duis non rhoncus tortor. Etiam eu tortor felis. TD-200F 2GB Thumbdrive ALL NEW Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec faucibus erat ut efficitur vehicula. Quisque ut purus venenatis, commodo quam id, vulputate mi. Vivamus velit mi, elementum a magna a, placerat suscipit tellus. Vestibulum ante ipsum primis in faucibus orci luctus et ultrices posuere cubilia Curae; Duis non rhoncus tortor. Etiam eu tortor felis. TD-200F 2GB Thumbdrive Logo Don’ts Don’t use the USB-IF SuperSpeed USB Trident Logo or the USB-IF SuperSpeed USB 10 Gbps Trident Logo on packaging. Note: The “Logo don’ts” guidelines apply to all of the Logo versions. USB Logo Usage Guidelines 40 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Incorporating the USB Logo(s), the SuperSpeed USB Logo(s), the SuperSpeed USB 10 Gbps Logo(s), the Certified USB Charger Logo(s), or the Certified USB Fast Charger Logo(s) into your packaging, marketing materials, advertisements and manuals strengthens your marketing efforts by informing your consumers of the USB compatibility of your product(s). The following pages show samples of various marketing materials and examples of the USB Logo placement. Layout Packaging Packaging is printed in a variety of ways. Coarse printing, such as flexography on corrugate or screen printing on various materials, may benefit from using the 1-color or the reverse Logo. Product that is printed using finer printing methods, such as 4-color process can choose any Logo that best fits their Product box’s design. The goal is to choose the Logo that will reproduce most attractively onto the material which it is being printed. Lor ALL em ipsum NEW Don consectetur adipiscin dolor sit amet, effi g elit. citur vehicu ec faucibus erat ut qua purus venenatis, com la. Quisque u modo m id, vulputate mi. V tellu a magna a, placerat su ivamus velit mi, elementum prim s. Vestibulum ante scipit et ult is ci l ipsum Cura rices posuere cub uctus to e; Duis no in faucibus or ilia rtor. Etiam eu tor n rhon tor felis. 2GB TD-200F Thumbdrive USB Logo Usage Guidelines 41 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Layout Collateral Where you are not restricted by color, the full color Logo can be used for your print material. In situations where color is restricted, use the black, or if appropriate, 1-color or reverse versions of the Logo. XYZcompany Lorem ipsum dolor sit amet, cons ectetur adipiscing elit. Aliquam eget consequat neque. In a risus vel nibh consectetur lacinia. Quisq ue tincidunt vehicula ornare. Morbi augue odio, pharetra quis blandit sit amet, tempor nec eros. Curabitur eu sodales est. Morbi est lorem, pharetra non congue vitae, sodales nec nibh. Praesent vestibulum purus laoreet tellus consequat ut euismod leo lacinia. TD-200 F 2GB Thu mbdrive XYZcom pany Advertisements For 1-color newspaper advertisements, use the black or reverse version of the Logo. Full color magazine ads may use the 1-color, reverse or full color versions of the Logo, choosing the Logo that works best with the design of the ad. USB Logo Usage Guidelines 42 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. Layout Manuals Where the ® or TM symbols of the USB-IF SuperSpeed USB Trident Logo, the USB-IF SuperSpeed USB 10 Gbps Trident Logo or the USB-IF USB Type-CTM Charging Trident Logos have been omitted on the printing/engraving on Product chassis, the manufacturer/ Licensees must include the following statement(s) in their user’s manual/printed materials accompanying the Product: “The SuperSpeed USB Trident Logo is a registered trademark of USB Implementers Forum, Inc.” or “The SuperSpeed USB 10 Gbps Trident Logo is a registered trademark of USB Implementers Forum, Inc.” or “The USB Type-CTM Charging Trident Logos are trademarks of USB Implementers Forum, Inc.” The statement(s) must be accompanied with the proper USB Type-CTM Charging Trident, SuperSpeed USB Trident, or SuperSpeed USB 10 Gbps Trident image of the mark(s) with the correct rendering of the ® or TM. The SuperSpeed USB Trident Logo is a registered trademark of USB Implementers Forum, Inc. User’s Manual USB Logo Usage Guidelines 43 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. The USB Logo(s), the SuperSpeed USB Logo(s), the SuperSpeed USB 10 Gbps Logo(s), the SuperSpeed USB Trident Logo(s), the SuperSpeed USB 10 Gbps Trident Logo(s), the USB Type-CTM Charging Trident Logo(s), the Certified USB Charger Logo(s), and the Certified USB Fast Charger Logo(s) are available in various digital file formats. Print Applications Encapsulated Postscript (EPS) files were created in Adobe* Illustrator* and can be reproduced at any size without compromising quality. Use these versions for printing. Each version is a separate file. Logos can be printed using either PANTONE® colors or the 4-color process mix specified on page 6. Type has been converted to outlines; no fonts are required to reproduce the Logos. The files have been saved for both Macintosh* and PC. On Screen Applications These versions are for on screen applications such as the Web or Microsoft* PowerPoint* presentations. They have been created in RGB color mode, and should not be used for offset printing. These versions were rasterized in Adobe* Photoshop* from Adobe Illustrator files (with the exception of the EPS files). Keep in mind that these files look their best when placed at 100% size, or smaller. PNG and or JPG files are provided for use in on-screen applications. EPS files were created in Adobe* Illustrator* and are saved in RGB color format. These files are to be used in software applications that utilize vector-based artwork, e.g., Adobe* Flash*. * Third party names and brands are the property of their respective owners. PANTONE® is the property of Pantone, Inc. Art Files Logo Guidelines for USB Type-CTM Products and Cables that Support Alternate Modes USB Type-CTM Products 45 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Introduction The USB Type-CTM specification enables Alternate Modes (Alt Modes), an option that permits a vendor or standards organization to support additional features. These logo guidelines were created for vendors and standards organizations implementing Alternate Modes on USB Type-CTM hosts, devices and cables that have obtained a standard or vendor ID (SVID) assigned by the USB Implementers Forum (USB-IF). These guidelines outline the proper Logo Groupings, Logo Order, Logo Clear Space, and Logo Placement. The USB Logos can only be used solely in conjunction with Product as defined in the USB Logo Usage Guidelines. USB Type-CTM Products 46 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Logos SuperSpeed USB Trident Logo + Non-USB Technology Logo SuperSpeed USB Type-CTM Charging Trident Logo + Non-USB Technology Logo To provide the best user experience, it is recommended that all USB Type-CTM Ports on hosts and devices that support Alternate Modes and have obtained a SVID assigned by the USB-IF should be prominently identified. To visually display that a USB Type-CTM Port supports an Alternate Mode(s), the SuperSpeed USB Trident Logo or SuperSpeed USB Type-CTM Charging Trident Logo may be positioned side-by-side with non-USB technology logo/s. This is called a Logo Grouping. The SuperSpeed USB Trident Logo may be used solely in conjunction with Product as defined in the USB Logo Usage Guidelines. The SuperSpeed USB Type-CTM Charging Trident Logo is for use with a USB Type-CTM Port that delivers power over USB VBUS as defined in the USB Logo Usage Guidelines. Example non-USB technology Logo displayed as “LOGO” USB Type-CTM Products 47 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Logos SuperSpeed USB 10 Gbps Trident Logo + Non-USB Technology Logo SuperSpeed USB 10 Gbps Power Delivery Trident Logo + Non-USB Technology Logo To provide the best user experience, it is recommended that all USB Type-CTM Ports on hosts and devices that support Alternate Modes and have obtained a SVID assigned by the USB-IF should be prominently identified. To visually display that a USB Type-CTM Port supports an Alternate Mode(s), the SuperSpeed USB 10 Gbps Trident Logo or SuperSpeed USB 10 Gbps USB Type-CTM Charging Trident Logo may be positioned side-by-side with non-USB technology Logo/s. This is called a Logo Grouping. The SuperSpeed USB 10 Gbps Trident Logo may be used solely in conjunction with Product as defined in the USB Logo Usage Guidelines. The SuperSpeed USB 10 Gbps USB Type-CTM Charging Trident Logo is for use with a USB Type-CTM Port that delivers power over USB VBUS as defined in the USB Logo Usage Guidelines. Example non-USB technology Logo displayed as “LOGO” USB Type-CTM Products 48 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Logo Grouping Logo Grouping To properly identify that a USB Type-CTM Port supports Alternate Mode(s), the SuperSpeed USB Trident Logo, the SuperSpeed USB 10 Gbps Trident Logo or USB Type-CTM Charging Trident Logos may be positioned side-by-side with 1-3 non-USB technology Logo/s. This is called a Logo Grouping. A USB Logo may not be grouped with more than three non-USB technology Logo/s. Logo Grouping displaying three non-USB Technology Logos Example non-USB technology Logo displayed as “LOGO”. USB Type-CTM Port not to scale. USB Type-CTM Port USB Type-CTM Products 49 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Logo Order Logo Order When a SuperSpeed USB Trident Logo, SuperSpeed USB 10 Gbps Trident Logo, or USB Type-CTM Charging Trident Logo is grouped with a non-USB technology Logo/s, it is required that the USB Logo appear as the furthest Logo to the left of the entire Logo Grouping. Within a Logo Grouping, the SuperSpeed USB Trident Logo, the SuperSpeed USB 10 Gbps Trident Logo or USB Type-CTM Charging Trident Logo should NOT be placed in between or to the right of any non-USB technology Logo/s. Logo Order with USB Logo always displayed to the left USB Type-CTM Products 50 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Logo Clear Space Logo Clear Space These requirements apply to use of the SuperSpeed USB Trident Logo, the SuperSpeed USB 10 Gbps Trident Logo and the USB Type-CTM Charging Trident Logos when grouped with a non-USB technology Logo/s. Logo Clear Space When the USB Logos are used, avoid visual clutter by maintaining a minimum amount of clear space around the Logos that is equal to the width of the square on the trident symbol. If the USB Type-CTM Charging Trident Logos are used, maintain a minimum amount of clear space around the logo that is equal to the width of the battery terminal for the size selected. Non-USB Technology Logo Clear Space Logo Groupings should consider minimum clear space for each individual technology Logo. If a non- USB technology Logo guidelines specify a clear space that is wider than the width needed for the corresponding USB Logo, then the clear space between the Logos should be the minimum required by the non-USB technology Logo. If a non-USB technology Logo requires a wider clear space than that required by the USB Logo, the clear space between all Logos in the Logo Grouping should be based on the Logo that specifies the widest amount of clear space. For consistent spacing, the amount of Logo Clear Space should be used between each of the Logos displayed adjacent to the USB Type-CTM Port. Logo Clear Space based on the SuperSpeed USB Trident Logo Logo Clear Space based on non-USB Technology Logo’s Clear Space minimum (If required to be wider than USB Logo clear space) Example: Clear space based on half of the height of the letter “L” in the word “LOGO” Example non-USB technology Logo displayed as “LOGO” USB Type-CTM Products 51 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Logo Placement in Relation to a USB Type-CTM Port To provide the best user experience, it is recommended that all USB Type-CTM Ports on hosts and devices that support Alternate Modes and have obtained a SVID assigned by the USB-IF should be prominently identified with a Logo adjacent to the USB Type-CTM Port. Logo Groupings may be placed above, below, to the left, or to the right of the USB Type-CTM Port. If a USB Type-CTM port is vertical on a host, hub or device, rotate the USB and non-USB technology Logos so that they are parallel with the long side of the port. Logo Groupings may also be stacked. For stacked Logo Groupings, the USB Logo should be on top. Logo Placement Above Below Left Vertical Right Example non-USB technology Logo displayed as “LOGO” Representative of USB Type-CTM Port Horizontal Above Below Right Left USB Type-CTM Products 52 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Logo Placement Logo Placement in Relation to a USB Type-CTM Port These requirements apply to the use of the SuperSpeed USB Trident Logo, the SuperSpeed USB 10 Gbps Trident Logo and the USB Type-CTM Charging Trident Logos when grouped with non-USB technology Logo/s. Logo Height All non-USB technology Logos within the Logo Grouping should be scaled proportionately to equal the height of the USB Logo. Non- USB technology Logos should not be greater in height than the USB Logo. Logo Position Logo Groupings should be centered horizontally to the USB Type-CTM Port when placed above or below the Port or centered vertically to the USB Type-CTM Port when placed to the right or to the left of the Port. Logo Orientation When placed adjacent to the USB Type-CTM Port, SuperSpeed USB Trident Logos and USB Type-CTM Charging Trident Logos can be oriented horizontally with the large circle or SS on the left. Placement of Logo Grouping above or below the USB Type-CTM Port Horizontally centered Logo Grouping USB Type-CTM Port Horizontally centered Logo Grouping USB Type-CTM Port Example non-USB technology Logo displayed as “LOGO”. USB Type-CTM Port not to scale. Placement of Logo Grouping to the right or to the left of the USB Type-CTM Port Vertically centered Logo Grouping USB Type-CTM Port Vertically centered Logo Grouping USB Type-CTM Port USB Type-CTM Products 53 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Logo Usage Logo Placement In some situations where space is limited, a device may not support the ability to display a USB Logo or Logo Grouping. Where the SuperSpeed USB Trident Logo, the SuperSpeed USB 10 Gbps Trident Logo or the USB Type-CTM Charging Trident Logos have been omitted on the printing/engraving on Product chassis adjacent to the USB Type-CTM Port, the manufacturer/Licensees must include the following statement(s) in their user’s manual/packaging/printed materials accompanying the Product: “The USB Type-CTM Charging Trident Logos are registered trademarks of USB Implementers Forum, Inc.” and/or “The SuperSpeed USB Trident Logo is a registered trademark of USB Implementers Forum, Inc.” and/or “The SuperSpeed USB 10 Gbps Trident Logo is a registered trademark of USB Implementers Forum, Inc.” The statement(s) must be accompanied with the proper USB Type-CTM Charging Tridents, SuperSpeed USB Trident, or SuperSpeed USB 10 Gbps Trident Logos with the correct rendering of the ® or ™. All other trademarks are registered to their respective groups. USB Type-CTM Products 54 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Logo Don’ts Example non-USB technology Logo displayed as “LOGO”. USB Type-CTM. Port not to scale. Note: The “Logo don’ts” guidelines apply to all of the Logo versions. Don’t reproduce USB Type-CTM Port Logos in other colors than white, black, molded or engraved. Don’t place a USB Logo to the right of a Logo Grouping. Don’t place the Logo on the bottom surface of a Product or its packaging. Don’t use more than four Logos in a Logo Grouping, including the USB Logo. Don’t place a USB Logo in the middle of a Logo Grouping. Don’t obstruct the Logo with labels or other graphics. Don’t make the non-USB technology Logo larger in height than a USB Logo. Don’t place a non-USB technology Logo next to a USB Type-CTM Port without the appropriate USB Logo included in a proper Logo Grouping. USB Type-CTM Products 55 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. Examples Example A SuperSpeed USB 10 Gbps Trident Logo + DisplayPort Logo SuperSpeed USB 10 Gbps USB Type-CTM Charging Trident Logo + DisplayPort Logo SuperSpeed USB 10 Gbps Trident Logo + HDMI Logo Example B ® SuperSpeed USB 10 Gbps USB Type-CTM Charging Trident Logo + HDMI Logo ® Example C SuperSpeed USB 10 Gbps Trident Logo + MHL Logo SuperSpeed USB 10 Gbps USB Type-CTM Charging Trident Logo + MHL Logo SuperSpeed USB 10 Gbps Trident Logo + MHL Symbol Use of the HDMI logo should follow the HDMI Adopted Trademark and Logo Usage Guidelines found at www.hdmi.org/logosphotos/atlug.aspx Logo Guidelines For USB Type-CTM Alternate Mode Cables 56 © 2000-2018 USB Implementers Forum, Inc. (USB-IF). All rights reserved. All other trademarks are registered to their respective groups. USB Type-CTM to USB Type-CTM full-featured passive cables are intended to support all Alternate Mode solutions that utilize USB Type-CTM to USB Type-CTM cables and will not bear any Alternate Mode markings. USB Type-CTM to USB Type-CTM active cables that only support one specific Alternate Mode solution may bear Alternate Mode markings and the appropriate USB Logos. USB Type-CTM adapter cables that only support one specific Alternate Mode solution may bear Alternate Mode markings and the USB trident only. Examples
