PSTN Cellular Significant reduction in communication costs Superb audio quality Easy to install & operate Cost Effective gateway with fast ROI PBX or direct phone connection Supports GSM/ CDMA networks CGW-T Convergence Analog Cellular Gateway A Cost-Saving Analog Gateway The CGW-T is a one channel, analog cellular gateway that connects the office telephony system to the mobile network. Perfectly tailored to meet the specific needs of small or home offices, it provides a stable and reliable tool in a competitive price without compromising on capabilities and audio quality. Connected to the PBX analog trunk or directly to the phone with a plug & play installation, the CGW-T can be up and running in a matter of minutes. The CGW-T enables offices to save on their expanses by converting fixed-to-mobile calls into lower cost mobile-to-mobile calls and by taking advantage of the Carrier VPN or special business tariff programs. The gateway can be used also as a telephony network access device in places where no other connection is available. Cellular operators can also leverage on CGW-T to increase their revenues. Placing the gateway at the client premise ensures that the entire office cellular activity will pass via the specific Carrier's network. SME & Carrie r’s Solutio n PBX Analog Gateway Analog CGW-T Analog Cellular Gateway Cost-effective connectivity through the ITS Teleco CGW-T Dual-band GSM engine Toll Restrictions Call Duration control Output volume control Easy DTMF programming, no PC required CLIP / CLIR Software upgradeable Informative LCD: system & calling status Powerful features: LCR table, Roaming, Call Barring, Loop disconnect & Reverse Polarity, CLIP / CLIR and more • • • • • • • • • Main Features I82001422 Ver.1 Headquarters 29 Hametzuda St. Azur 58001, Israel Tel: +972 3 5576868 Fax: +972 3 5576942 its@its-tel.com www.its-tel.com USA 500A Lake St. Ramsey, NJ 07446 Tel: 201 785 8912 Toll-free: 800 991 8186 Fax: 201 785 8916 its.usa@its-tel.com www.its-tel.com Technical Specications System Connections: 2 Wire FXS for PBX CO line GSM Network Type: GSM Phase II GSM Module: Integrated dual-band (900/1800, 850/1900 MHz) Transmission Power: Max. 2W / 900MHz Max. 2W / 850MHz Max. 1W / 1800MHz Max. 1W / 1900MHz Receiver Sensitivity: 104 dBm SIM card: 3V (plug-in, small) Off-hook AC Impedance: 600Ω On-hook Line Voltage: 48VDC Off-hook Line Current Maximum: 25Am Off-hook Loop resistance threshold: 800Ω Dial Tone Frequency: 400Hz Ringing Voltage: 48Vrms, 25Hz Supported Dialing Type: DTMF Power Supply Input: 110VAC / 60Hz ; 220VAC / 50Hz Power supply output: 9VDC, 800mA Administration DTMF programming Control & Maintenance CLIP/CLIR SIM protection from unauthorized removal Gain control Network lock Hardware specification LCD 2x16 Dimensions (HxWxD): 215x45x130mm / 8.4x1.7x5.18" Weight: 0.8Kg/ 1.76Lbs Temperature Range 0°C-45°C / 32°F-113°F Maximum Relative Humidity: 95% Installation Wall mounting Antennas Antenna: SMA Female Antenna Cable Length: 3m (9.8ft) Impedance Antenna: 50Ω Cellular Network PSTN GSM CDMA PBX CGW-T Extensions Analog $ Expensive Connectivity Fees Low-Cost Mobile-to-Mobile Connection Direct phone Connection Network Access or Backup System • • • • • • Cellular operators Small and home offices with extensive usage of cellular calls Remote or in-field workers (VPN) Offices without PSTN connectivity Temporary or off-site offices (Construction sites, survey camps) And more... Perfect Solution for: