NAME: Silvertree Products, LLC
ADDRESS: 1615 Fletcher Ave, Fort Wayne, IN 46803 INFORMATION PHONE: 260-426-2474
DATE REVISED: MARCH 2005
EMERGENCY CONTACT (CHEMTREC): 800-424-9300
SECTION II - HAZARDOUS INGREDIENTS
CAS # OSHA TWA ppm ACGIA TWA ppm
Proprietary Fillers and water Proprietary n/a n/a
Product is a stable dispersion of very small particles of water. Emulsion contains formaldehyde at concentrations below 0.1% by weight. No other
photochemically reactive solvents or reactive chemical solvents are added. Solids content is 45-65% by weight, which consists of polymer, surfactant
and / or hydrocolloid stabilizers and minor amounts of inorganic salts. The solid portion is combustible and will decompose under pyrolysis conditions.
Residual unpolymerized monomer levels are less than 0.5% of the total product.
Information concerning non-hazardous ingredients is considered a Trade Secret.
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
BOILING POINT :>204ûC (400ûF)
SPECIFIC GRAVITY: (H2O=1):1.01
COATING V.O.C: NA
VAPOR DENSITY: NA
EVAPORATION RATE: SLOWER THAN ETHER
SOLUBILITY IN WATER: INSOLUBLE
APPEARANCE AND ODOR: RED OILY LIQUID, MILD CHEMICAL ODOR
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: >93ûC (200ûF)
METHOD USED: TCC
FLAMMABLE LIMITS IN AIR BY VOLUME - LOWER: N/A
EXTINGUISHING MEDIA: DRY CHEMICAL, ALCOHOL FOAM, CARBON DIOXIDE AND WATER SPRAY.
SPECIAL FIRE FIGHTING PROCEDURES: Turn out gear and SCBA equipment
UNUSUAL FIRE AND EXPLOSION HAZARDS: NONE
SECTION V - REACTIVITY DATA
CONDITIONS TO AVOID: N/A
HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: CARBON MONOXIDE, CARBON DIOXIDE, NITROGEN OXIDES.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR
SECTION VI - HEALTH HAZARD DATA
SKIN CONTACT: Dermatitis or skin