MSDS #PD100S
ProGold and DeoxIT - 100% Aerosol
ProGold (G100L) and DeoxIT (D100L) are compatible with most materials.
However, in large scale use, we recommend compatibility testing for the
specific applications. Contact manufacturer for guidelines and assistance.
Sprays do not include solvents to assist in flushing away contaminants. Use
as you would the 100% liquid products. If solvents are desired, use the 5%
sprays (MSDS #PDP5S) or 5% liquids (MSDS #PDP5L).
Note: ProGold G100S-2: Use where maximum concentration of ProGold is
needed (lubricating) and solvents are not desired (preventing overspray and
affecting sensitive plastics). This is a 100% concentrated spray and contains
no solvents. ProGold G100S-2 utilizes a metered, one-shot valve to spray
short bursts of 100% ProGold liquid. Use this spray as you would the 100%
liquid ProGold. On accessible parts (edge connectors, batteries, etc.), apply
and wipe off excess. On inaccessible parts (potentiometers, switches, etc.),
spray one or two bursts of ProGold, flush with a "contact cleaner" that does
not leave a residue (CaiKleen 41, CaiKleen A/V or CaiKleen IPA), then
spray one final burst of ProGold. When flushing is not possible, spray one
burst, operate the device, reapply one more burst of ProGold. DeoxIT
D100S-2: Use where maximum concentration of DeoxIT is needed
(lubricating) and solvents are not desired (preventing overspray and affecting
sensitive plastics). DeoxIT D100S is a 100% concentrate spray, and contain
no solvents. DeoxIT D100S utilizes a metered valve to spray short bursts of
100% DeoxIT liquid. Use this spray as you would the 100% liquid DeoxIT.
On accessible parts (edge connectors, batteries, etc.), apply and wipe off
excess. On inaccessible parts (potentiometers, switches, etc.), spray one or
two bursts of DeoxIT, flush with a "contact cleaner" that does not leave a
residue (CaiKleen 41, CaiKleen A/V or CaiKleen IPA), then spray one final
burst. When flushing is not possible, spray one burst, opera